Determination of tellurium in ores, concentrates and related materials by graphite-furnace atomic-absorption spectrometry after separations by iron collection and xanthate extraction.

A method for determining approximately 0.01 mug/g or more of tellurium in ores, concentrates, rocks, soils and sediments is described. After sample decomposition and evaporation of the solution to incipient dryness, tellurium is separated from > 300 mug of copper by co-precipitation with hydrous ferric oxide from an ammoniacal medium and the precipitate is dissolved in 10M hydrochloric acid. Alternatively, for samples containing 300 mug of copper, the salts are dissolved in 10M hydrochloric acid. Tellurium in the resultant solutions is reduced to the quadrivalent state by heating and separated from iron, lead and various other elements by a single cyclohexane extraction of its xanthate complex from approximately 9.5M hydrochloric acid in the presence of thiosemicarbazide as a complexing agent for copper. After washing with 10M hydrochloric acid followed by water to remove residual iron, chloride and soluble salts, tellurium is stripped from the extract with 16M nitric acid and finally determined, in a 2% v/v nitric acid medium, by graphite-furnace atomic-absorption spectrometry at 214.3 nm in the presence of nickel as matrix modifier. Small amounts of gold and palladium, which are partly co-extracted as xanthates if the iron-collection step is omitted, do not interfere. Co-extraction of arsenic is avoided by volatilizing it as the bromide during the decomposition step. The method is directly applicable, without the co-precipitation step, to most rocks, soils and sediments.