MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s00604-023-05725-y

Медицинская библиотека · Mikrochimica acta · 2023

Fabrication of a simple 3D-printed microfluidic device with embedded electrochemiluminescence detection for rapid determination of sibutramine in dietary supplements.

Praoboon Nisachon, Tangkuaram Tanin, Kruefu Viruntachar, Pookmanee Pusit, Phaisansuthichol Sirirat, Kuimalee Surasak, Laorodphan Nattapol, Satienperakul Sakchai

СтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

The design and fabrication of a simple 3D-printed platform with embedded electrochemiluminescence (ECL) detection for sibutramine determination is described. The microfluidic platform was fabricated by the fused deposition 3D-printing technique with polylactic acid filament, facilitated by computer-aided design (CAD). A three-electrode system was integrated into the device using graphene carbon paste as a working electrode, Ag/AgCl wire as a reference, and a graphite rod as a counter electrode. A further modification was carried out by applying bimetallic Au-Pt nanoparticle-supported multi-walled carbon nanotubes (MWCNT-Au-Pt) on the working electrode surface to enhance the electrocatalytic performance by exploiting the unique properties of nanomaterials. The analytical feasibility of the CAD-ECL sensor was tested through its application for the determination of sibutramine in dietary supplements. Under the optimized conditions, based on the enhancing effect of luminol emission, the device exhibited a linear calibration curve of the logarithmic sibutramine concentration versus ECL intensity in the range 5 × 10-3 to 1 ng mL-1. The limit of detection was 3 pg mL-1 with a relative standard deviation of 1.7% (n = 15). The 3D-printed prototype can be successfully applied to a small-scale analysis in a simple and cost-effective approach.

Для цитирования: Praoboon Nisachon, Tangkuaram Tanin, Kruefu Viruntachar, Pookmanee Pusit, Phaisansuthichol Sirirat, Kuimalee Surasak, Laorodphan Nattapol, Satienperakul Sakchai. Fabrication of a simple 3D-printed microfluidic device with embedded electrochemiluminescence detection for rapid determination of sibutramine in dietary supplements.. Mikrochimica acta. 2023. DOI: 10.1007/s00604-023-05725-y.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.