Der Unfallchirurg · 2017
[Function of prosthesis components in lower limb amputees with bone-anchored percutaneous implants : Biomechanical aspects].
СтатьяНазвание и аннотация: Перевод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Blumentritt S
Аннотация
BACKGROUND: Bone anchorage of an artificial limb has been proven to be an alternative intervention for amputees when prosthesis use is seriously reduced because of stump problems. Little is known about how prosthesis components interact with bone and joints and which potential the optimum use provides with respect to quality of treatment of leg amputees.
OBJECTIVE: Does osseointegration influence the motor activity of residual limbs differently compared with socket prostheses? How should prosthesis components be aligned? What type of prosthetic knee joints should be preferred in transfemoral amputees?
MATERIAL AND METHODS: Transfer of biomechanical knowledge of socket prosthetics to bone-anchored prostheses. Pilot studies with a limited number of amputees.
RESULTS: Force transmission at the interface between the prosthesis and residual limb stump is completely different for osseointegrated fixation and socket design; however, the number of muscles available for control remains unchanged. Because the iliotibial tract is missing, bending moments of the femur are expected to be greater. Prosthetic alignment is very critical for gait pattern and the basic rules seem to be the same as for socket design. The foot position determines the knee function for below-knee amputees. The position of the femur influences the gait pattern of above-knee amputees. The lowest risk of falls and best functional properties are shown by microprocessor controlled knee joints.
CONCLUSION: Osseointegrated leg prostheses have some biomechanical advantages over the socket design. Since rehabilitation quality is clearly affected the prosthetic alignment has to be done carefully and precisely. As a rule microprocessor controlled knee joints are indicated.
OBJECTIVE: Does osseointegration influence the motor activity of residual limbs differently compared with socket prostheses? How should prosthesis components be aligned? What type of prosthetic knee joints should be preferred in transfemoral amputees?
MATERIAL AND METHODS: Transfer of biomechanical knowledge of socket prosthetics to bone-anchored prostheses. Pilot studies with a limited number of amputees.
RESULTS: Force transmission at the interface between the prosthesis and residual limb stump is completely different for osseointegrated fixation and socket design; however, the number of muscles available for control remains unchanged. Because the iliotibial tract is missing, bending moments of the femur are expected to be greater. Prosthetic alignment is very critical for gait pattern and the basic rules seem to be the same as for socket design. The foot position determines the knee function for below-knee amputees. The position of the femur influences the gait pattern of above-knee amputees. The lowest risk of falls and best functional properties are shown by microprocessor controlled knee joints.
CONCLUSION: Osseointegrated leg prostheses have some biomechanical advantages over the socket design. Since rehabilitation quality is clearly affected the prosthetic alignment has to be done carefully and precisely. As a rule microprocessor controlled knee joints are indicated.