A Capacitive Immunosensor Based on a Polypyrrole-CTAB for Probe-Free Detection of SARS-CoV-2 Spike Protein.

A capacitive screen-printed electrode immunosensor operating in non-faradaic mode by dispensing redox probes was developed for the Coronavirus 2 Spike (S) protein. This new strategy enabled direct detection of the S protein by measuring changes in the electrochemical capacitance resulting from antigen-antibody interactions on the electrode surface, altering interfacial dielectric properties. To enhance analytical sensitivity and provide an electrode surface with attractive capacitive and conductive properties, an in-house graphite ink-based screen-printed electrode was developed and subsequently modified with a polypyrrole (PPy) layer in bulk-synthesized in the presence of Cetyltrimethylammonium bromide (CTAB). CTAB acted as a dispersing and structure-directing agent, promoting homogeneous distribution and guiding the PPy polymerization, resulting in a composite with improved charge density storage and high conductivity. Analytical signals of the S proteins in spiked serum were detected by measuring the Specific Capacitances taken from cyclic voltammograms. This capacitive immunosensor achieved a linear range from 1 to 100 µg/mL (R2 = 0.989, p < 0.05), with a limit of detection of 0.45 µg/mL of S protein, which falls within the clinical range for COVID-19 diagnostics. Probe-free detection without ferri/ferrocyanide steps minimizes errors by probe adsorptions and is easy to use as a point-of-care, unlike conventional immunosensors.