Patient-specific fluid-structure simulations of anomalous aortic origin of right coronary arteries.

OBJECTIVES

Anomalous aortic origin of the right coronary artery (AAORCA) may cause ischemia and sudden death. However, the specific anatomic indications for surgery are unclear, so dobutamine-stress instantaneous wave-free ratio (iFR) is increasingly used. Meanwhile, advances in fluid-structure interaction (FSI) modeling can simulate the pulsatile hemodynamics and tissue deformation. We sought to evaluate the feasibility of simulating the resting and dobutamine-stress iFR in AAORCA using patient-specific FSI models and to visualize the mechanism of ischemia within the intramural geometry and associated lumen narrowing.

METHODS

We developed 6 patient-specific FSI models of AAORCA using SimVascular software. Three-dimensional geometries were segmented from coronary computed tomography angiography. Vascular outlets were coupled to lumped-parameter networks that included dynamic compression of the coronary microvasculature and were tuned to each patient's vitals and cardiac output.

RESULTS

All cases were interarterial, and 5 of 6 had an intramural course. Measured iFRs ranged from 0.95 to 0.98 at rest and 0.80 to 0.95 under dobutamine stress. After we tuned the distal coronary resistances to achieve a stress flow rate triple that at rest, the simulations adequately matched the measured iFRs (r = 0.85, root-mean-square error = 0.04). The intramural lumen remained narrowed with simulated stress and resulted in lower iFRs without needing external compression from the pulmonary root.

CONCLUSIONS

Patient-specific FSI modeling of AAORCA is a promising, noninvasive method to assess the iFR reduction caused by intramural geometries and inform surgical intervention. However, the models' sensitivity to distal coronary resistance suggests that quantitative stress-perfusion imaging may augment virtual and invasive iFR studies.