Humeri under external load: Mechanical implications of differing bone curvature in American otter and honey badger.

The mechanical properties of limb long bones are impacted by bone shape and especially curvature, which is therefore likely to be of adaptive value. We use finite element analysis to compare the mechanical properties of humeri of the closely related American otter and honey badger under external loads, and to analyze the significance of bone curvature. We simulate the effects generated by loads applied in directions that differ relative to the humeral longitudinal axes, and then compare the stress characteristics with a series of humerus-inspired abstracted curved structures with increasing ratio (C/R) of eccentricity C to radius of cross section R. The humeri of the two species differ in bone curvature, with C/R of 0.6201 and 0.8752, respectively. Our analysis shows that the peak and mean stress values found within the sampling line of bone models reach a minimum when the directions of loads are 105 ± 5°, and the humerus of the American otter always experienced lower stress values than those of the honey badger in the sampling line. An analysis of stress distribution in abstract curved structures showed the greatest reduction in stress when the direction of external load was equal or greater than 95°. This suggests that the variability of the direction of external loads is an important determinant of bone curvature, and should be accounted for when assessing load carrying capacity. This study provides a basis for biomechanics research and yields insight into the form-function relationship of nature's structural elements within limbs. It potentially contributes to the design of biomimetic robots while also highlighting the functional significance of humeral bone curvature in mammals.