Effects of UV Aging on Antimicrobial Performance and Color Stability of Hygienic Additive-Modified Polyurethane and Waterborne Coatings Applied to Oriental Beech (Fagus orientalis L.).

This study was carried out to investigate the antimicrobial performance and color stability of silver (Ag)-modified polyurethane and waterborne coating systems applied to Oriental beech (Fagus orientalis L.) wood after the specimens were subjected to UV aging for 24 h. Antimicrobial activity and color stability were evaluated before and after aging against Escherichia coli (E. coli, ATCC 25922), Staphylococcus aureus (S. aureus, NCTC 13552), and Candida albicans (C. albicans) in accordance with the JIS Z 2801 standard. Color changes were determined using CIELab parameters (ΔL*, Δa*, Δb*, and ΔE*) in accordance with the TS EN ISO 16474-3 standard. Prior to UV exposure, the highest antibacterial activity against E. coli occurred in Ag-modified waterborne varnish coatings, whereas the highest antifungal activity against C. albicans occurred in Ag-modified polyurethane paint systems. After UV aging, antimicrobial performance varied depending on the coating type. Particularly, Ag-modified waterborne varnish coatings retained significant antibacterial activity against E. coli and S. aureus and exhibited the highest antifungal performance against C. albicans. Color analysis revealed that UV exposure also caused significant changes in all coating systems. The most pronounced variations were observed for the lightness difference (ΔL*), red-green color difference (Δa*), and yellow-blue color difference (Δb*) parameters, while the lowest total color difference (ΔE*) values were observed for Ag-modified polyurethane and Ag-modified waterborne varnish coatings. Overall, Ag-modified waterborne varnish systems demonstrated superior performance in both antimicrobial activity and color stability after UV aging.