MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1038/s41598-026-40049-w

Медицинская библиотека · Scientific reports · 2026

Study on sealing performance of spring energy storage seal used for ultra high pressure throttle nozzle.

Feng Shaobo, Ren Yongcang, Zhou Xuan, Feng Chunyu

СтатьяПеревод пока не подготовлен

Аннотация

Through the combination of experiment, simulation and verification, this study successfully developed a spring energy storage seal ring, which can withstand the pressure of 175 MPa and the working temperature of -46 ° C to 180 ° C, showing significant application potential. Firstly, the constitutive model of the sealing material (PTFE and its modification) at -46 ° C, 20 ° C and 180 ° C was determined by compression experiment; The finite element analysis was carried out, and the effects of the angle of the support ring, the interference of the inner and outer lips and the angle behind the lip on the sealing performance were analyzed. The results show that the design angle of PEEK gasket suitable for the seal ring is 40 °, and the seal ring material is 10 C-PTFE; In order to ensure that the contact stress is greater than 175 MPa and the equivalent force is less than the yield strength, the margin of the inner and outer lip of the seal ring is 0.25 mm and 0.2 mm respectively, and the rear angle of the inner and outer lip is 9 ° and 11 ° respectively. Based on these findings, a spring energy storage seal ring for throttle valve was manufactured. In the 175 MPa hydraulic tooling test, the maximum pressure drop is 1.75 MPa. In the gas seal test of natural gas wellhead throttling nozzle, the pressure change is 0.4 MPa at 20 ℃, 0.7 MPa at 180 ℃, and 1.1 MPa at -46 ℃.

Для цитирования: Feng Shaobo, Ren Yongcang, Zhou Xuan, Feng Chunyu. Study on sealing performance of spring energy storage seal used for ultra high pressure throttle nozzle.. Scientific reports. 2026. DOI: 10.1038/s41598-026-40049-w.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.