A Compliant Transoral Surgical Robotic System Based on a Parallel Flexible Mechanism.

Transoral robotic surgery (TORS) allows for access to oropharyngeal regions in an effective and minimally invasive manner. However, safe TORS access to deep pharyngeal (such as hypopharynx) sites remains a great challenge for current surgical robotic systems. In this work, we introduce a novel continuum robot with an optimized flexible parallel mechanism, to meet stringent requirements imposed by TORS on size, workspace, flexibility, and compliance. The system is comprised of two parts, a guidance part and an execution part, and achieves 11 controllable degrees of freedom. The execution part of the robot, based on the optimized flexible parallel mechanism, is able to reach deep sites in the oropharynx and larynx with the assistance of the continuum guidance part. In addition to the mechanical design, extensive analysis and experiments were carried out. Kinematic models were derived and the reachable workspace of the robot was verified to cover the entire target surgical area. Experimental results indicate that the robot achieves significantly enhanced compliance. Additionally, the designed robot can withstand a load of 1.5 N within the allowable range of the deflection. The positioning errors caused by the interference between different mechanisms can be effectively eliminated using the proposed compensation method. The maximum displacement error of this system under various conditions is less than 2 mm and the maximum bending error is less than 7.5°, which are satisfied for TORS. Cadaver trials were conducted to further demonstrate the feasibility. The reduced setup time and the reduced time to access the target site indicate that the developed surgical robotic system can achieve better operative efficiency in TORS when compared with current systems.