MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1302/0301-620x.89b7.18717

Медицинская библиотека · The Journal of bone and joint surgery. British volume · 2007

Cement penetration and primary stability of the femoral component after impaction allografting. A biomechanical study in the cadaveric femur.

Albert C, Patil S, Frei H, Masri B, Duncan C, Oxland T, Fernlund G

СтатьяПоддержка исследования: вне правительства СШАПеревод пока не подготовлен

Аннотация

This study explored the relationship between the initial stability of the femoral component and penetration of cement into the graft bed following impaction allografting. Impaction allografting was carried out in human cadaveric femurs. In one group the cement was pressurised conventionally but in the other it was not pressurised. Migration and micromotion of the implant were measured under simulated walking loads. The specimens were then cross-sectioned and penetration of the cement measured. Around the distal half of the implant we found approximately 70% and 40% of contact of the cement with the endosteum in the pressure and no-pressure groups, respectively. The distal migration/micromotion, and valgus/varus migration were significantly higher in the no-pressure group than in that subjected to pressure. These motion components correlated negatively with the mean area of cement and its contact with the endosteum. The presence of cement at the endosteum appears to play an important role in the initial stability of the implant following impaction allografting.

Для цитирования: Albert C, Patil S, Frei H, Masri B, Duncan C, Oxland T, Fernlund G. Cement penetration and primary stability of the femoral component after impaction allografting. A biomechanical study in the cadaveric femur.. The Journal of bone and joint surgery. British volume. 2007. DOI: 10.1302/0301-620x.89b7.18717.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.