Embryonic aortic arch material properties obtained by optical coherence tomography-guided micropipette aspiration.

It is challenging to determine the in vivo material properties of a very soft, mesoscale arterial vesselsof size ∼ 80 to 120 μm diameter. This information is essential to understand the early embryonic cardiovascular development featuring rapidly evolving dynamic microstructure. Previous research efforts to describe the properties of the embryonic great vessels are very limited. Our objective is to measure the local material properties of pharyngeal aortic arch tissue of the chick-embryo during the early Hamburger-Hamilton (HH) stages, HH18 and HH24. Integrating the micropipette aspiration technique with optical coherence tomography (OCT) imaging, a clear vision of the aspirated arch geometry is achieved for an inner pipette radius of Rp = 25 μm. The aspiration of this region is performed through a calibrated negatively pressurized micro-pipette. A computational finite element model is developed to model the nonlinear behaviour of the arch structure by considering the geometry-dependent constraints. Numerical estimations of the nonlinear material parameters for aortic arch samples are presented. The exponential material nonlinearity parameter (a) of aortic arch tissue increases statistically significantly from a = 0.068 ± 0.013 at HH18 to a = 0.260 ± 0.014 at HH24 (p = 0.0286). As such, the aspirated tissue length decreases from 53 μm at HH18 to 34 μm at HH24. The calculated NeoHookean shear modulus increases from 51 Pa at HH18 to 93 Pa at HH24 which indicates a statistically significant stiffness increase. These changes are due to the dynamic changes of collagen and elastin content in the media layer of the vessel during development.