Simulation of Laser Lithotripsy-Induced Heating in the Urinary Tract.

PURPOSE: Holmium laser lithotripsy is a common modality used to fragment urinary stones during ureteroscopy. Laser energy deposited during activation produces heat and potentially causes thermal bioeffects. We aimed to characterize laser-induced heating through a computational simulation.

MATERIALS AND

METHODS

A finite-element model was developed and used to estimate temperature in the urinary tract. Axisymmetric models of laser lithotripsy in a renal calyx, the renal pelvis, and proximal ureter were created. Heat generation by laser and heat transfer were simulated under different laser powers between 5 and 40 W. Irrigation fluid flow was introduced at rates between 0 and 40 mL/min. The model was validated by comparison with previous in vitro temperature data in a test tube, then used to calculate heating and thermal dose in the three tissue models.

RESULTS

Simulated temperature rises agreed well with most in vitro experimental measurements. In tissue models, temperature rises depended strongly on laser power and irrigation rate, and to a lesser extent on location. Injurious temperatures were reached for 5-40 W laser power without irrigation, >10 W with 5 mL/min irrigation, 40 W with 15 mL/min irrigation, and were not found at 40 mL/min irrigation. Tissue injury volumes up to 2.3 cm3 were calculated from thermal dose.

CONCLUSIONS

The results suggest a numerical model can accurately simulate the thermal profile of laser lithotripsy. Laser heating is strongly dependent on parameters and may cause a substantial temperature rise in the fluid in the urinary tract and surrounding tissue under clinically relevant conditions.