The current status of locked plating: the good, the bad, and the ugly.

Locked plate technology has evolved in an effort to overcome the limitations associated with conventional plating methods, primarily for improving fixation in osteopenic bone. The development of screw torque and plate-bone interface friction is unnecessary with locked plate designs, significantly decreasing the amount of soft tissue dissection required for implantation, preserving the periosteal blood supply, and facilitating the use of minimally invasive percutaneous bridging fixation techniques. The locked plate is a fixed-angle device because angular motion does not occur at the plate screw interface. The use of locked plate technology allows the orthopaedic surgeon to manage fractures with indirect reduction techniques while providing stable fracture fixation. The secure 'feel' of locked plates, ease of application, and the low incidence of complications noted in early clinical reports have contributed to the proliferation of this technology. Along with reports of clinical successes, as the use of fixed angle/locked plates has increased, clinical failures are being noticed. This review will focus on the biomechanics of locked plate technology, appropriate indications for its use, laboratory and clinical comparisons to conventional plating techniques, and potential mechanisms of locked plate failure that have been observed.