MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.bios.2018.05.003

Медицинская библиотека · Biosensors & bioelectronics · 2018

Novel electrochemical sensing platform for ultrasensitive detection of cardiac troponin I based on aptamer-MoS2 nanoconjugates.

Qiao Xiujuan, Li Kunxia, Xu Jinqiong, Cheng Ni, Sheng Qinglin, Cao Wei, Yue Tianli, Zheng Jianbin

Оценочное исследованиеСтатьяПеревод пока не подготовлен

Аннотация

Cardiac troponin I (cTnI) is a specific and sensitive biomarker for the early diagnosis of acute myocardial infarction and for the subsequent clinical treatments. In this work, novel electrochemical sensing platform for sensing of cTnI based on aptamer-MoS2 nanoconjugates was proposed. For comparison, core-shell Au@SiO2@Au nanoparticles were also used for sensing of cTnI. The sensing schemes and electrochemical responses of the proposed sensors were investigated by electrochemical impedance spectroscopy (EIS) in 5.0 mM K3[Fe(CN)6]/K4[Fe(CN)6] (1:1) solution containing 0.1 M KCl, respectively. Results showed that the aptamer-Au@SiO2@Au based aptasensor shows a linear rage of 10 pM-10.0 μM with the detection limits of 1.23 pM For the aptamer-MoS2 nanosheets based aptasensor, the linear range for cTnI detection was from 10 pM to 1.0 μM with a lower detection limit of 0.95 pM Meanwhile, both the sensors were successfully applied for detection of cTnI in human blood samples. The two kinds of aptsensors have been successfully used for detecting of cTnI in human blood serums. Moreover, no negligible signal changes could be observed in the presence of non-targets of CK-MB and Myo, suggesting the good potential for clinic diagnosis.

Для цитирования: Qiao Xiujuan, Li Kunxia, Xu Jinqiong, Cheng Ni, Sheng Qinglin, Cao Wei, Yue Tianli, Zheng Jianbin. Novel electrochemical sensing platform for ultrasensitive detection of cardiac troponin I based on aptamer-MoS2 nanoconjugates.. Biosensors & bioelectronics. 2018. DOI: 10.1016/j.bios.2018.05.003.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.