MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.biortech.2017.08.099

Медицинская библиотека · Bioresource technology · 2017

Metabolic engineering of Klebsiella pneumoniae J2B for co-production of 3-hydroxypropionic acid and 1,3-propanediol from glycerol: Reduction of acetate and other by-products.

Ko Yeounjoo, Seol Eunhee, Sundara Sekar Balaji, Kwon Seongjin, Lee Jaehyeon, Park Sunghoon

СтатьяПеревод пока не подготовлен

Аннотация

Production of 3-hydroxypropionic acid (3-HP) or 1,3-propanediol (1,3-PDO) production from glycerol is challenging due to the problems associated with cofactor regeneration, coenzyme B12 synthesis, and the instability of pathway enzymes. To address these complications, simultaneous production of 3-HP and 1,3-PDO, instead of individual production of each compound, was attempted. With over-expression of an aldehyde dehydrogenase, recombinant Klebsiella pneumoniae could co-produce 3-HP and 1,3-PDO successfully. However, the production level was unsatisfactory due to excessive accumulation of many by-products, especially acetate. To reduce acetate production, we attempted; (i) reduction of glycerol assimilation through the glycolytic pathway, (ii) increase of glycerol flow towards co-production, and (iii) variation of aeration rate. These efforts were partially beneficial in reducing acetate and improving co-production: 21g/L of 1,3-PDO and 43g/L of 3-HP were obtained. Excessive acetate (>150mM) was still produced at the end of bioreactor runs, and limited co-production efficiency.

Для цитирования: Ko Yeounjoo, Seol Eunhee, Sundara Sekar Balaji, Kwon Seongjin, Lee Jaehyeon, Park Sunghoon. Metabolic engineering of Klebsiella pneumoniae J2B for co-production of 3-hydroxypropionic acid and 1,3-propanediol from glycerol: Reduction of acetate and other by-products.. Bioresource technology. 2017. DOI: 10.1016/j.biortech.2017.08.099.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.