Journal of cataract and refractive surgery · 2026
Simulated ocular biometry effects on add-power demand in multifocal intraocular lenses.
СтатьяНазвание и аннотация: Перевод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Son Hyeck-Soo, Auffarth Gerd U, Baur Isabella, Khoramnia Ramin, Labuz Grzegorz
Аннотация
PURPOSE: To use ray-tracing simulations to assess the dependency of add-power demand on ocular biometry.
SETTING: David J. Apple Laboratory for Ocular Pathology, Department of Ophthalmology, University of Heidelberg, Heidelberg, Germany.
DESIGN: Experimental study.
METHODS: Optical biometry of 34 patients scheduled for routine cataract surgery was collected and the following parameters used to build a personalized eye model: keratometry (K), anterior chamber depth (ACD), and axial length (AL). Ray-tracing software was applied for pseudophakic-eye simulations. Each model featured a biconvex lens with radii of curvature adjusted for best distance vision. Trial spectacles with -4 diopters (D), -3 D, -2 D, and -1.5 D were placed in front of a virtual eye. The intraocular lens (IOL)-power change required to induce a desirable near/intermediate effect at the spectacle plane was calculated for the far-point condition.
RESULTS: Mean values for K, ACD, and AL were 7.79 ± 0.24 mm, 3.22 ± 0.60 mm, and 23.77 ± 1.34 mm, respectively. The lowest and highest add power (IOL plane) varied by 0.39 D, 0.52 D, 0.76 D, and 0.98 D for -1.5 D, -2 D, -3 D, and -4 D trial spectacles, respectively. High correlation was found between the observed add-power change and the ACD, indicating a linear increase of the add-power demand for larger ACD values. The AL and the K demonstrated poor or no correlation with the required IOL-power adjustment.
CONCLUSIONS: The ACD, which determines the effective lens position in our model, has greater impact on add-power demand than AL or K. The reported change may contribute to interparticipant variability in defocus curves of multifocal patients.
SETTING: David J. Apple Laboratory for Ocular Pathology, Department of Ophthalmology, University of Heidelberg, Heidelberg, Germany.
DESIGN: Experimental study.
METHODS: Optical biometry of 34 patients scheduled for routine cataract surgery was collected and the following parameters used to build a personalized eye model: keratometry (K), anterior chamber depth (ACD), and axial length (AL). Ray-tracing software was applied for pseudophakic-eye simulations. Each model featured a biconvex lens with radii of curvature adjusted for best distance vision. Trial spectacles with -4 diopters (D), -3 D, -2 D, and -1.5 D were placed in front of a virtual eye. The intraocular lens (IOL)-power change required to induce a desirable near/intermediate effect at the spectacle plane was calculated for the far-point condition.
RESULTS: Mean values for K, ACD, and AL were 7.79 ± 0.24 mm, 3.22 ± 0.60 mm, and 23.77 ± 1.34 mm, respectively. The lowest and highest add power (IOL plane) varied by 0.39 D, 0.52 D, 0.76 D, and 0.98 D for -1.5 D, -2 D, -3 D, and -4 D trial spectacles, respectively. High correlation was found between the observed add-power change and the ACD, indicating a linear increase of the add-power demand for larger ACD values. The AL and the K demonstrated poor or no correlation with the required IOL-power adjustment.
CONCLUSIONS: The ACD, which determines the effective lens position in our model, has greater impact on add-power demand than AL or K. The reported change may contribute to interparticipant variability in defocus curves of multifocal patients.