Self-Extinguishing Alginate-Based Xerogel Foams for Thermal Insulation.

Biopolymer-based porous materials are attracting increasing interest as sustainable alternatives to conventional thermal insulation foams; however, achieving low thermal conductivity together with adequate mechanical performance and fire response remains challenging. Building on previous formulation screening, this study investigates alginate-expanded perlite xerogel foams modified with chitosan and glycerol for thermal insulation applications. Foams were prepared via in situ CO2 foaming and Ca2+ crosslinking, followed by mild oven drying. The effects of expanded perlite (9-12%), glycerol (0-10%), and chitosan (0-1%) were systematically investigated. All formulations exhibited low thermal conductivity (0.0467-0.0525 W m-1 K-1) and UL-94 V-0 self-extinguishing behavior. Incorporation of dispersed chitosan significantly enhanced compressive strength, reaching 263 kPa at 10% strain, within the range of commercial polymer foams. Image analysis and SEM showed that chitosan suppressed bubble coalescence, reduced large-pore fractions, and improved particle coverage, yielding structurally coherent matrices. Glycerol primarily acted as a plasticizer, improving the dimensional stability, but contributing less to pore refinement. The developed foams combine competitive thermal insulation performance, self-extinguishing behavior, and mechanical properties suitable for self-supporting insulation applications through a simple, water-based manufacturing route, highlighting their potential as sustainable alternatives to conventional fossil-based insulation materials for building applications.