MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1167/9.5.6

Медицинская библиотека · Journal of vision · 2009

Visual performance after correcting higher order aberrations in keratoconic eyes.

Sabesan Ramkumar, Yoon Geunyoung

Сравнительное исследованиеСтатьяПоддержка NIH: внешняя программаПоддержка исследования: вне правительства СШАПеревод пока не подготовлен

Аннотация

Keratoconic eyes are affected by an irregular optical blur induced by significant magnitude of higher order aberrations (HOAs). Although it is expected that correction of ocular aberrations leads to an improvement in visual performance, keratoconic eyes might not achieve the visual benefit predicted by optical theory because of long-term adaptation to poor retinal image quality. To investigate this, an adaptive optics (AO) system equipped with a large-stroke deformable mirror and a Shack-Hartmann wavefront sensor was used to correct the aberrations and measure high contrast tumbling E visual acuity (HCVA) in 8 keratoconic eyes. Eight normal eyes were employed as control. Aberrations were dynamically corrected with closed-loop AO during visual acuity testing, with residual root-mean-square error of around 0.1 microm in both groups over 6-mm pupil (p = 0.11). With AO correction, the HCVA in logMAR was -0.26 +/- 0.063 in normal eyes, and in keratoconic eyes, it was -0.07 +/- 0.051 (p = 0.0001) for the same pupil size. There was no correlation in the AO-corrected HCVA for normals with the magnitudes of their native HOA. However, within keratoconic eyes, poorer AO-corrected HCVA was observed with an increase of the native magnitudes of HOA (R(2) = 0.67). This may indicate that long-term visual experience with poor retinal image quality, induced by HOA, may restrict the visual benefit achievable immediately after correction in keratoconic eyes.

Для цитирования: Sabesan Ramkumar, Yoon Geunyoung. Visual performance after correcting higher order aberrations in keratoconic eyes.. Journal of vision. 2009. DOI: 10.1167/9.5.6.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.