The Journal of prosthetic dentistry · 2018
Individual 3-dimensional printed mold for treating hard palate carcinoma with brachytherapy: A clinical report.
СтатьяНазвание и аннотация: Перевод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Lancellotta Valentina, Pagano Stefano, Tagliaferri Luca, Piergentini Marco, Ricci Alessandro, Montecchiani Sandro, Saldi Simonetta, Chierchini Sara, Cianetti Stefano, Valentini Vincenzo, Kovács György, Aristei Cynthia
Аннотация
This clinical report describes the use of a 3-dimensional (3D) printer to create an individual mold for delivering high-dose-rate interventional radiotherapy for hard palate cancer. The maxillary teeth and palate were scanned with an intraoral scanner (3Shape TRIOS 3). The scan was transformed into a mesh using the standard tessellation language (STL) format and aligned with Digital Imaging and Communications in Medicine (DICOM) computed tomography (CT) images using free Blue Sky Plan 4 planning software. A mold was generated by tracing a guideline around the gingival margins of the maxillary teeth and palate on the scan mesh in accordance with established parameters. All data were imported into computer-aided design (CAD) software. For this patient, 3 parallel 2.2-mm-diameter ducts were placed 10 mm from each other in the mold mesh. A CT scan of the patient's mouth with the mold in place was used for treatment planning. Treatment was delivered by means of microSelectron digital afterloading.