Design and On-Orbit Validation of a Compact Wide-Swath Spaceborne SWIR Push-Broom Camera.

To address the demand for wide-swath, high-resolution short-wave infrared (SWIR) imaging on resource-constrained spaceborne platforms, this study presents the design and on-orbit validation of a compact dual-channel push-broom (line-scanning) imaging system. The system adopts a transmissive optical architecture and a centralized, compact electronic control unit (ECU) configuration. By interleaving and mosaicking sixteen InGaAs linear array detectors, the system achieves an imaging swath of approximately 187 km and a nominal ground sampling distance of about 24 m, while maintaining a total instrument mass of 10.62 kg and a power consumption of approximately 12 W, thereby demonstrating a high level of integration and efficient resource utilization. To address focal plane consistency issues arising from multi-detector mosaicking, a closed-loop leveling method was developed using the modulation transfer function (MTF) as the primary performance metric. Through defocus estimation and quantitative correction of protrusions on a SiC substrate, convergence toward a unified confocal focal plane among multiple detectors was achieved. On-orbit image quality assessment indicates that the full width at half maximum (FWHM) of the line spread function (LSF) for both channels is approximately 1.38 pixels, with favorable signal-to-noise ratio (SNR) performance. These results validate the effectiveness of the proposed focal plane leveling strategy as well as the opto-mechanical-thermal design of the system. The proposed approach provides a practical pathway for the engineering implementation and consistency control of multi-detector mosaicked SWIR payloads under stringent resource constraints.