Optimal design and 3D printing of prosthetic socket based on the interface pressure between the socket and residual limb.

BACKGROUND

At present, the quantifiable pressure distribution at the interface between the socket and stump is seldom applied in the design and fabrication of the socket.

OBJECTIVES

This study aimed to optimize the socket based on the interface pressure of residual limb-socket, thereby avoiding excessive local load on the residual limb, reducing the load on the pressure-sensitive (PS) regions and making the limb more evenly loaded.

METHODS

The residual limb was divided into the main load-bearing regions, the pressure-tolerant regions, and the PS regions according to the carrying capacity at its different regions. Based on these bearing regions, a mathematical function was developed, which applied modifications/adjustments to the socket design in a Computer Aided Design (CAD) environment by using the adjustment function. Besides, three adjusted sockets were produced by using selective laser sintering 3D printing technology.

RESULTS

The wearing of the 3D-adjusted printed sockets reduced the contact interface pressures in the distal tibial region and the fibular head region by 85.6% and 84.4%, respectively. In addition, the walking distance of the subject was increased by 18.34%, and the overall pressure distribution on the stump became more uniform.

CONCLUSIONS

The pressures in the original overpressure regions and the PS regions could reduce, whereas the pressure in the low-load regions of main load-bearing or pressure-tolerant regions could increase by modifying the socket with the pressure adjustment function. At the same time, the pressure among different regions was more uniform except for the sensitive regions.