Biomechanical impact of the porous-fibrous tissue behaviour in the temporomandibular joint movements. An in silico approach.

The movement of the temporomandibular joint (TMJ) is a function of its complex geometry and its interaction with the surrounding soft tissues. Owing to an increase in the prevalence of temporomandibular joint disorders (TMDs), many computational studies have attempted to characterize its biomechanical behaviour in the last 2 decades. However, most such studies are based on a single computational model that markedly simplifies the complex geometry and mechanical properties of the TMJ's soft tissues. The present study aims to computationally evaluate in a wider sample the importance of considering their complex anatomy and behaviour for simulating both damping and motion responses of this joint. Hence, 6 finite element models of healthy volunteers' TMJ were developed and subjected to both conditions in two different behavioural scenarios. In one, the soft tissues' behaviour was modelled by considering the porous-fibrous properties, whereas in the other case they were simplified assuming isotropic-hyperelastic response, as had been traditionally considered. The damping analysis, which mimic the conditions of an experimental test of the literature, consisted of applying two different compressive loads to the jaw. The motion analysis evaluated the condylar path during the mandible centric depression by the action of muscular forces. From the results of both analyses, the contact pressures, intra-articular fluid pressure, path features, and stress/strain values were compared using the porous-fibrous and isotropic-hyperelastic models. Besides the great differences observed between patients due patient-specific morphology, the porous-fibrous approach yielded results closer to the reference experimental values and to the outcomes of other computational studies of the literature. Our findings underscore, therefore, the importance of considering realistic joint geometries and porous-fibrous contribution in the computational modelling of the TMJ, but also in the design of further joint replacements or in the development of new biomaterials for this joint.