High-performance TFNC membrane with adsorption assisted for removal of Pb(II) and other contaminants.

Rapid and thorough removal of heavy metal ions in wastewater is critical for the urgent need of clean water. Herein, we prepared a high-performance thin film nanofibrous composite (TFNC) membrane consisting of a polyacrylonitrile (PAN)-UiO-66-(COOH)2 composite nanofibrous substrate (CPAN) and a calcium alginate (CaAlg) skin layer. Owing to abundant adsorption sites of UiO-66-(COOH)2 MOF, the optimal CPAN-2 nanofibrous substrate showed excellent adsorption capacity for lead ions. The maximum Pb2+ adsorption capacity of CPAN-2 substrate calculated by Langmuir isotherm model was 254.5 mg/g. Meanwhile, due to the relatively loose structure of CaAlg skin layer, this TFNC membrane showed high water permeate flux about 50 L m-2h-1 at 0.1 MPa, and the rejection for dyes was higher than 95%. Therefore, CaAlg/CPAN TFNC membranes were appropriate for dynamic adsorption/filtration to remove Pb2+. Compared with original CaAlg/PAN membrane, the optimal CaAlg/CPAN TFNC membrane showed much better ability to treat Pb(II)-containing wastewater and had good recyclability. Most importantly, the CaAlg/CPAN TFNC membrane could treat 7659 L m-2 wastewater containing single lead ions under WHO drinking water standard, and effectively deal with more simulated lead-containing wastewater. This work could provide a substitutable solution for effective removal of heavy metal ions and other various contaminants in wastewater.