Using a reduced-order model to investigate the effect of the heart rate on the aortic dissection.

The computational cost of a three-dimensional (3D) fluid-structure interaction (FSI) simulation of a dissected aorta has prevented researchers from investigating the effect of a wide range of the heart rate on the hemodynamic quantities in the disease. We have presented a systematic procedure to develop a zero-dimensional (0D) model for a dissected aorta. A series of numerical experiments were used to calculate the values for the resistance, inertance, and compliance of each lumen with irregular geometries. Having validated the results from the 0D model against those from the 3D model for one heart rate, we used the 0D model to investigate the effect of the heart rate of 50-150 bpm on the flow rates and the pressures in an idealized geometry of an aortic dissection. The 0D model showed acceptable accuracy when compared with the 3D FSI simulation. For instance, at peak systole, 7.18% relative error in the flow rate in the true lumen was observed for 0D and 3D simulations. The flow rate in the true lumen showed a stronger dependency on the heart rate, that is, 300% for the true lumen and 1.5% for the false lumen. The pressure difference between the lumina increased non-monotonically as the heart beats faster. Because of its efficiency, the reported procedure can be used for uncertainty and sensitivity analysis of the hemodynamic quantities in a diseased aorta with complex geometries such as that of the aortic dissection.