A Wide Dynamic Range RF Attenuation Calibration System for 9 kHz to 10 MHz.

Accurate and traceable attenuation measurements are essential for RF instrumentation, communication equipment, electromagnetic compatibility (EMC) testing, and wide dynamic-range signal characterization. This paper presents a practical, accurate, and robust working-standard attenuation measurement system covering the frequency range from 9 kHz to 10 MHz for traceable RF attenuation calibration and wide dynamic-range characterization. The system is based on a direct RF substitution technique and employs two cascaded resistive step attenuators with 10 dB and 1 dB step sizes as the reference standard, providing a total attenuation range of 60 dB with 1 dB resolution. A general-purpose receiver is used as a precision level detector, enabling a simple and fully automated measurement configuration. Traceability is established through calibration against an inductive voltage divider (IVD)-based primary attenuation standard. Owing to the excellent frequency flatness of the reference standard, a single-frequency calibration at 1 MHz is sufficient to characterize the entire operating range from 9 kHz to 10 MHz. The direct measurement capability extends to 60 dB and is further expanded beyond 100 dB through a double-step measurement technique. A comprehensive uncertainty evaluation in accordance with the Guide to the Expression of Uncertainty in Measurement (GUM) yields expanded uncertainties of 3.6 × 10-3 dB at 20 dB, 5.6 × 10-3 dB at 60 dB, and 8.4 × 10-3 dB at 100 dB. Measurements up to 60 dB show excellent agreement with the primary attenuation standard, while alternative validation demonstrates consistency at 80 dB and 100 dB. The obtained uncertainty levels are comparable to or lower than those reported for similar systems in the literature. The proposed system provides a practical and traceable solution for routine RF attenuation calibration, supporting EMC testing, communication-system characterization, RF sensing and measurement applications, and the dissemination of RF metrological traceability.