Journal of voice : official journal of the Voice Foundation · 2023
A Novel Low-Cost, Open-Source, Three-Dimensionally Printed Thyroplasty Simulator.
СтатьяНазвание и аннотация: Перевод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Kostas Julianna C, Lee Mark, Rameau Anaïs
Аннотация
OBJECTIVE: Training of surgical procedures on awake patients, such as medialization thyroplasty, poses challenges to educators and trainees. Three-dimensionally (3D)-printed simulators provide opportunity to practice in low-stakes settings. We present the first 3D-printed thyroplasty simulator incorporating a cartilaginous framework, endolaryngeal soft tissue housed in a 3D-printed manikin with endoscopic visualization.
METHODS: Male and female laryngeal cartilages and endolarynx molds were 3D printed from an existing open-source design. Cartilage models were made of heat-treated polylactic acid (HTPLA), a material chosen for its thermal stability, allowing drilling. They were combined with molded silicone endolarynges modeling glottic insufficiency. Larynges were set in a 3D-printed head-and-neck manikin with an attached borescope for internal visualization similar to distal chip laryngoscopy. Eight laryngologists evaluated the simulator by drilling a thyroplasty window, inserting an implant for medialization, and rating the model using a modified Michigan Standard Simulation Experience Scale (1 = strongly disagree, 5 = strongly agree).
RESULTS: The model was well rated in educational value (mean 4.7, standard deviation [SD] 0.3), fidelity (mean 3.8, SD 0.2), and overall value (mean 4.8, SD 0.5). Qualitative assessment concluded the model was anatomically realistic and that HTPLA was a good approximation of the density and texture of thyroid cartilage. The materials for one larynx cost $4.09.
CONCLUSION: This high-fidelity 3D-printed simulator demonstrates educational value for thyroplasty training. The low-cost, open-source design has broad implications for universal access to this simulator platform.
METHODS: Male and female laryngeal cartilages and endolarynx molds were 3D printed from an existing open-source design. Cartilage models were made of heat-treated polylactic acid (HTPLA), a material chosen for its thermal stability, allowing drilling. They were combined with molded silicone endolarynges modeling glottic insufficiency. Larynges were set in a 3D-printed head-and-neck manikin with an attached borescope for internal visualization similar to distal chip laryngoscopy. Eight laryngologists evaluated the simulator by drilling a thyroplasty window, inserting an implant for medialization, and rating the model using a modified Michigan Standard Simulation Experience Scale (1 = strongly disagree, 5 = strongly agree).
RESULTS: The model was well rated in educational value (mean 4.7, standard deviation [SD] 0.3), fidelity (mean 3.8, SD 0.2), and overall value (mean 4.8, SD 0.5). Qualitative assessment concluded the model was anatomically realistic and that HTPLA was a good approximation of the density and texture of thyroid cartilage. The materials for one larynx cost $4.09.
CONCLUSION: This high-fidelity 3D-printed simulator demonstrates educational value for thyroplasty training. The low-cost, open-source design has broad implications for universal access to this simulator platform.