JSES international · 2020
Biomechanical assessment of lateral ulnar collateral ligament repair and reconstruction with or without internal brace augmentation.
СтатьяНазвание и аннотация: Перевод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Melbourne Craig, Cook James L, Della Rocca Gregory J, Loftis Christopher, Konicek John, Smith Matthew J
Аннотация
BACKGROUND: Surgical treatment of posterolateral rotatory instability (PLRI) using primary repair or reconstruction of the lateral collateral ligament complex have proven inconsistent. This study aimed to test the hypothesis that augmentation of LUCL repair or palmaris longus tendon reconstruction using a suture tape augmentation would be associated with less rotational displacement and greater torque load to failure (LTF) compared with nonaugmented constructs.
METHODS: Cadaveric elbows (n = 12 matched pairs) were used. Baseline stiffness and displacement values were obtained. The LUCL was transected followed by repair alone, repair with augmentation, reconstruction with palmaris longus graft, or reconstruction with augmentation. Specimens were retested including torque LTF. Paired t tests were performed to assess the biomechanical effects of augmentation.
RESULTS: Augmentation was associated with higher LTF than repair and reconstruction alone (P = .008 and .047, respectively). Displacement was less with augmentation in reconstruction groups (P = .048) but not in repair groups. Suture tape augmentation maintained rotational stiffness better than repair alone (P = .01). Although reconstruction with augmentation maintained rotational stiffness better than nonaugmented reconstruction, the differences were not statistically significant (P = .057). Mode of failure for repair alone was predominantly suture pulling through repaired ligament. Augmented repairs primarily failed at the anchor-bone interface. Modes of failure for both reconstruction groups were similar, including graft tearing and/or slipping at the anchor.
CONCLUSION: When positioned in neutral forearm rotation and 90o of flexion to simulate postoperative conditions, augmentation of LUCL repair or tendon reconstruction using suture tape is associated with better resistance to rotational loads compared with nonaugmented repair or reconstruction, while maintaining near-native rotational stiffness.
METHODS: Cadaveric elbows (n = 12 matched pairs) were used. Baseline stiffness and displacement values were obtained. The LUCL was transected followed by repair alone, repair with augmentation, reconstruction with palmaris longus graft, or reconstruction with augmentation. Specimens were retested including torque LTF. Paired t tests were performed to assess the biomechanical effects of augmentation.
RESULTS: Augmentation was associated with higher LTF than repair and reconstruction alone (P = .008 and .047, respectively). Displacement was less with augmentation in reconstruction groups (P = .048) but not in repair groups. Suture tape augmentation maintained rotational stiffness better than repair alone (P = .01). Although reconstruction with augmentation maintained rotational stiffness better than nonaugmented reconstruction, the differences were not statistically significant (P = .057). Mode of failure for repair alone was predominantly suture pulling through repaired ligament. Augmented repairs primarily failed at the anchor-bone interface. Modes of failure for both reconstruction groups were similar, including graft tearing and/or slipping at the anchor.
CONCLUSION: When positioned in neutral forearm rotation and 90o of flexion to simulate postoperative conditions, augmentation of LUCL repair or tendon reconstruction using suture tape is associated with better resistance to rotational loads compared with nonaugmented repair or reconstruction, while maintaining near-native rotational stiffness.