Arthroscopy : the journal of arthroscopic & related surgery : official publication of the Arthroscopy Association of North America and the International Arthroscopy Association · 2020
Suture Tape Reduces Quadriceps Tendon Repair Gap Formation Compared With High-Strength Suture: A Cadaveric Biomechanical Analysis.
Сравнительное исследованиеСтатьяНазвание и аннотация: Перевод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Roessler Philip P, Burkhart Timothy A, Getgood Alan, Degen Ryan M
Аннотация
PURPOSE: To compare the biomechanical differences between quadriceps tendon (QT) repair with high-strength suture (HSS) versus suture tape (ST) with varying number of suture passes.
METHODS: In total, 28 fresh-frozen QTs were randomized into 2 groups: (1) HSS; or (2) ST; specimens were then further randomized into subgroups of either 4 or 6 suture passes. Specimens were secured within a materials testing system and a 150-N preload was applied for 10 seconds followed by a cyclic loading protocol between 50 N and 250 N for 1000 cycles. Video was used to follow tracking markers used to calculate the magnitude of tendon displacement. Two-way univariate analysis of variance was used to determine the effect of suture type and passes on the displacement after preloading and mixed repeated-measures analysis of variance was used to determine the effect of suture type and passes on displacement following cyclic loading.
RESULTS: There were large increases in displacement following the preload across all conditions (7.82 ± 3.64 mm), with no statistically significant differences between groups. There was a significant difference in the mean (± standard deviation) displacement between the ST (5.24 ± 2.82 mm) and HSS (7.93 ± 2.91 mm) starting at 200 cycles, which became more pronounced with successive testing out to 1000 cycles (P = .021). There were no significant difference with respect to the number of suture or tape passes.
CONCLUSIONS: Following preloading at 150 N, significant displacement occurred in both QT repair groups. ST demonstrated significantly less displacement than HSS under cyclic loading and had greater ultimate failure loads.
CLINICAL RELEVANCE: When performing QT repair, emphasis should be placed on appropriate pretensioning of sutures to at least 150 N before knot-tying. In addition, where available, ST should be used over HSS to reduce further cyclic elongation and improve ultimate failure loads.
METHODS: In total, 28 fresh-frozen QTs were randomized into 2 groups: (1) HSS; or (2) ST; specimens were then further randomized into subgroups of either 4 or 6 suture passes. Specimens were secured within a materials testing system and a 150-N preload was applied for 10 seconds followed by a cyclic loading protocol between 50 N and 250 N for 1000 cycles. Video was used to follow tracking markers used to calculate the magnitude of tendon displacement. Two-way univariate analysis of variance was used to determine the effect of suture type and passes on the displacement after preloading and mixed repeated-measures analysis of variance was used to determine the effect of suture type and passes on displacement following cyclic loading.
RESULTS: There were large increases in displacement following the preload across all conditions (7.82 ± 3.64 mm), with no statistically significant differences between groups. There was a significant difference in the mean (± standard deviation) displacement between the ST (5.24 ± 2.82 mm) and HSS (7.93 ± 2.91 mm) starting at 200 cycles, which became more pronounced with successive testing out to 1000 cycles (P = .021). There were no significant difference with respect to the number of suture or tape passes.
CONCLUSIONS: Following preloading at 150 N, significant displacement occurred in both QT repair groups. ST demonstrated significantly less displacement than HSS under cyclic loading and had greater ultimate failure loads.
CLINICAL RELEVANCE: When performing QT repair, emphasis should be placed on appropriate pretensioning of sutures to at least 150 N before knot-tying. In addition, where available, ST should be used over HSS to reduce further cyclic elongation and improve ultimate failure loads.