MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1007/s12194-023-00708-3

Медицинская библиотека · Radiological physics and technology · 2023

Dose estimation for cone-beam computed tomography in image-guided radiation therapy for pelvic cancer using adult mesh-type reference computational phantoms.

Cumur Ceyda, Fujibuchi Toshioh, Arakawa Hiroyuki, Hamada Keisuke

СтатьяПеревод пока не подготовлен

Аннотация

The use of cone-beam computed tomography (CBCT) is expanding owing to its installation in linear accelerators for radiation therapy, and the imaging dose induced by this system has become the center of attention. Here, the dose to patients caused by the CBCT imager was investigated. Organ doses and effective doses for male and female mesh-type reference computational phantoms (MRCPs) and pelvis CBCT mode, routinely used for pelvic irradiation, were estimated using the Particle and Heavy Ion Transport Code System. The simulation results were confirmed based on the point-dose measurements. The estimated organ doses for male MRCPs with/without raised arms and for female MRCPs with/without raised arms were 0.00286-35.6 mGy, 0.00286-35.1 mGy, 0.00933-39.5 mGy, and 0.00931-39.0 mGy, respectively. The anticipated effective doses for male MRCPs with/without raised arms and female MRCPs with/without raised arms irradiated by pelvis CBCT mode were 4.25 mSv, 4.16 mSv, 7.66 mSv, and 7.48 mSv, respectively. The results of this study will be useful for patients who undergo image-guided radiotherapy with CBCT. However, because this study only covered one type of cancer with one type of imager, and image quality was not considered, more studies should be conducted to estimate the radiation dose from imaging devices in radiation therapy.

Для цитирования: Cumur Ceyda, Fujibuchi Toshioh, Arakawa Hiroyuki, Hamada Keisuke. Dose estimation for cone-beam computed tomography in image-guided radiation therapy for pelvic cancer using adult mesh-type reference computational phantoms.. Radiological physics and technology. 2023. DOI: 10.1007/s12194-023-00708-3.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.