MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/s26133972

Медицинская библиотека · Sensors (Basel, Switzerland) · 2026

A Sensor-Based TinyML Acoustic Monitoring System for Edge-Side Animal Sound Recognition on Resource-Constrained Microcontrollers.

Wang Zhiqing, Yu Guicai

СтатьяПеревод пока не подготовлен

Аннотация

Edge-side acoustic monitoring enables animal sound recognition in remote environments, but microcontroller deployment remains constrained by feature extraction, numerical consistency, memory, latency, and energy consumption. This study presents a sensor-based tiny machine learning (TinyML) acoustic monitoring system on an Arduino Nano 33 BLE Sense Rev2 platform, integrating onboard pulse-density modulation (PDM) microphone acquisition, Mel-frequency cepstral coefficient (MFCC) feature extraction, deployment-side standardization, 8-bit integer (INT8) neural-network inference, and edge-side decision output. To reduce training-to-deployment feature drift, consistent frame parameters, mirrored C++ feature operators, and exported standardization parameters are used to align personal-computer-side and microcontroller-side feature representations. A source-isolated seven-class protocol was constructed for six target animal classes and one compound background-noise class. In the single-run baseline comparison, the proposed multilayer perceptron achieved 98.28% test accuracy and 97.21% test macro-F1, while the ten-seed stability analysis yielded 98.64% ± 0.26% test accuracy and 97.87% ± 0.38% test macro-F1. The deployed INT8 model occupied approximately 26.9 KB, with a post-window latency of about 303 ms. System-level input power was 0.783-0.825 W, corresponding to an estimated autonomy of 7.63-8.03 h under the reference battery setting.

Для цитирования: Wang Zhiqing, Yu Guicai. A Sensor-Based TinyML Acoustic Monitoring System for Edge-Side Animal Sound Recognition on Resource-Constrained Microcontrollers.. Sensors (Basel, Switzerland). 2026. DOI: 10.3390/s26133972.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.