MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1177/20584601221117251

Медицинская библиотека · Acta radiologica open · 2022

Evaluation of exposure factors of dual-energy contrast-enhanced mammography to optimize radiation dose with improved image quality.

Niroshani Sachila, Nakamura Tokiko, Michiru Nikaidou, Negishi Toru

СтатьяПеревод пока не подготовлен

Аннотация

BACKGROUND

Dual-energy contrast-enhanced mammography (DECEM) is an advanced breast imaging technique of digital mammography.

PURPOSE: To assess the total radiation dose received from complete DECEM using different combinations of exposure parameters for low- and high-energy images.

MATERIALS AND

METHODS

A dedicated phantom with three different concentrations of iodine inserts was used. Each iodine insert was 10 mm in diameter and concentration of 1.0 mgI/cm3, 2.0 mgI/cm3, and 4.0 mgI/cm3. The phantom was exposed at varying kVp levels. Mean glandular dose (MGD) was estimated. Contrast to noise ratio (CNR) and figure of merit (FOM) of the iodine inserts were used to assess the image quality.

RESULTS

The optimum CNR of the recombined images was obtained by using 28 kVp + 49 kVp tube voltage combination for 50 mm thickness, 50% fibroglandular phantom only with a 26% dose increase compared to the highest voltages (32 kVp + 49 kVp) that can be used for low energy (LE) and high energy (HE) imaging. The CNR value was increased with increasing iodine concentration (R 2 > 0.99).

CONCLUSION

The use of as low as possible tube voltage for the LE imaging of standard 50% fibroglandular-50% adipose, 50 mm thickness breast while using the highest tube voltage for HE imaging has reduced the MGD while keeping optimum image quality.

Для цитирования: Niroshani Sachila, Nakamura Tokiko, Michiru Nikaidou, Negishi Toru. Evaluation of exposure factors of dual-energy contrast-enhanced mammography to optimize radiation dose with improved image quality.. Acta radiologica open. 2022. DOI: 10.1177/20584601221117251.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.