Robot-assisted Kidney Transplantation.

This paper describes robot-assisted kidney transplantation (RAKT) from a living donor. The robot is docked between the parted legs of the patient, placed in the supine Trendelenburg position. Kidney allografts are provided by a living donor. Before vascular anastomosis, the kidney allograft is prepared by inserting a double-J stent in the ureter, and the temperature for the anastomosis is lowered by wrapping it in an ice-packed gauze. A 12 mm or 8 mm port for the robotic camera and three 8 mm ports for robotic arms are placed. A peritoneal pouch is created for the kidney allograft by raising the peritoneal flaps on both sides over the psoas muscle before dissecting the iliac vessels and bladder. A 6 cm Pfannenstiel incision is made to insert the kidney into the peritoneal pouch, lateral to the right iliac vessels. After clamping the external iliac vein with Bulldogs clamps, a venotomy is performed, and the graft renal vein is anastomosed to the external iliac vein in an end-to-side continuous manner with a 6/0 polytetrafluoroethylene suture. After clamping the graft renal vein, the iliac vein is declamped. This is followed by clamping of the external iliac artery, arteriotomy, arterial anastomosis with a 6/0 polytetrafluoroethylene suture, clamping of the graft renal artery, and declamping of the external iliac artery. Reperfusion is then carried out, and ureteroneocystostomy is performed using the Lich-Gregoir technique. The peritoneum is closed at a few locations with polymer locking clips, and a closed-suction drain is placed through one of the working ports. After deflating the pneumoperitoneum, all incisions are closed.