MedElevator Войти в исследования
← Поиск публикаций

DOI 10.3390/s24216959

Медицинская библиотека · Sensors (Basel, Switzerland) · 2024

Development of an Angular Stiffness Sensor to Measure Dental Implant Stability In Vitro.

Xu Weiwei, Chen Yen-Wei, Nagatomo Kanako, Liu Yifeng, Zhou Jihai, Dard Michel, Shen I Y

СтатьяПеревод пока не подготовлен

Аннотация

This investigation aims to develop an angular stiffness sensor intended for measuring dental implant stability in bone. The sensor hardware included a tiny eccentric motor and an accelerometer to measure a flex constant of an implant with its abutment. The sensor software included a mechanics-based model to convert the flex constant to angular stiffness at the implant/abutment junction to indicate the stability. The sensor's accuracy and effectiveness are demonstrated through use of Sawbones slab models that mimic a mandibular premolar section. The models include a Branemark Mk III implant inserted into Sawbones slabs of 5 different densities with a locator abutment. An incremental insertion torque was first recorded while the implant was placed in the Sawbones models. Then benchtop experiments were conducted to measure resonance frequencies and angular stiffness. Results indicated that angular stiffness increased with Sawbones density, showing high correlation with the measured resonance frequency (R=0.977) and the incremental insertion torque (R=0.959). Finally, accuracy of the angular stiffness sensor is calibrated in light of the resonance frequency. Angular stiffness scores 99% and 95% accuracy for Sawbones models mimicking medium cancellous bones with and without a cortical layer, respectively.

Для цитирования: Xu Weiwei, Chen Yen-Wei, Nagatomo Kanako, Liu Yifeng, Zhou Jihai, Dard Michel, Shen I Y. Development of an Angular Stiffness Sensor to Measure Dental Implant Stability In Vitro.. Sensors (Basel, Switzerland). 2024. DOI: 10.3390/s24216959.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.