[Six degree-of-freedom acquisition and analysis of jaw opening and closing with motion capture system].

OBJECTIVE

To explore the six degrees of freedom of jaw opening and closing movement with motion capture and analysis system to establish a quantitative method for studying mandibular movement and a digital basis for virtual reality study of mandibular movement.

METHODS

In a male adult with normal dentition without temporomandibular joint disorders, 3 fluorescent markers were pasted in the upper dentition and 4 in the lower dentition. Six cameras of the motion capture system were arranged in a semi-circular fashion. The subject sat in front of the camera at an 80-cm distance with the Frankfort plane kept parallel to the horizontal plane. The degree-of-freedom (3 linear displacement and 3 angular displacement) of jaw opening and closing movement was obtained by collecting the marker motion.

RESULTS

Six degrees of freedom of jaw opening and closing were obtained using the motion capture system. The maximum linear displacements of X, Y and Z axes were 5.888 089 cm, 0.782 269 cm, and 0.138 931 cm, and the minimum linear displacements were -3.649 83 cm, -35.961 2 cm, -5.818 63 cm, respectively. The maximum angular displacements of X, Y and Z axes were 0.760 088°, 2.803 753°, and 0.786 493°, with the minimum angular displacements of -2.526 18°, -0.625 94°, and -25.429 8°, respectively. Variations of linear displacements during jaw opening and closing occurred mainly in the Y axis, and those of angular displacement occurred mainly in the Z axis.

CONCLUSION

The six degree-of-freedom of mandibular movement can be accurately obtained with the motion capture system to allow quantitative examination of the mandibular movement.