Development of novel rectal/uterine clamping device.

We developed a novel clamping device for laparoscopic surgery, free from conventional pinch structure, capable of uniformly occluding any ductal organ. This study aimed to evaluate performance of the new clamper compared to the pinch-type clamper. The new clamper consists of two metal bars with ties at each end, which enables parallel clamping. A resected porcine stomach was used, with an infusion tube at the anal end to increase intra-luminal pressure. The oral side of the stomach was clamped with either the new clamper or the pinch-type clamper, and their performances were evaluated in qualitative and semi-quantitative manner. Qualitative evaluation involved imaging the clamping site at intra-gastric pressures from 0 to 15 mmHg using microfocus computed tomography. The new clamper showed no gap even under increased intra-luminal pressure, while the pinch-type clamper showed a gap on the distal side. Quantitative evaluation measured bursting pressure under continuous air insufflation. Air leakages were observed in the new clamper at higher intra-luminal pressures than in the pinch-type clamper (46.1 mmHg vs. 13.6 mmHg, P < 0.01). Our new clamping device showed superior performance in preclinical setting compared to the conventional pinch-type clamper. We are currently working on its design freezing and aiming for early commercialization.