MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1016/j.brachy.2020.06.015

Медицинская библиотека · Brachytherapy · 2020

Low-cost 3D print-based phantom fabrication to facilitate interstitial prostate brachytherapy training program.

Chiu Tsuicheng, Xiong Zhenyu, Parsons David, Folkert Michael R, Medin Paul M, Hrycushko Brian

СтатьяПеревод пока не подготовлен

Аннотация

PURPOSE: The purpose of this study was to manufacture a realistic and inexpensive prostate phantom to support training programs for ultrasound-based interstitial prostate brachytherapy.

METHODS AND MATERIALS: Five phantom material combinations were tested and evaluated for material characteristics; Ecoflex 00-30 silicone, emulsion silicone with 20% or 50% mineral oil, and regular or supersoft polyvinyl chloride (PVC). A prostate phantom which includes an anatomic simulated prostate, urethra, seminal vesicles, rectum, and normal surrounding tissue was created with 3D-printed molds using 20% emulsion silicone and regular and supersoft PVC materials based on speed of sound testing. Needle artifact retention was evaluated at weekly intervals.

RESULTS

Speed of sound testing demonstrated PVC to have the closest ultrasound characteristics of the materials tested to that of soft tissue. Several molds were created with 3D-printed PLA directly or cast on 3D-printed PLA with high heat resistant silicone. The prostate phantom fabrication workflow was developed, including a method to produce dummy seeds for low-dose-rate brachytherapy practice. A complete phantom may be fabricated in 1.5-2 h, and the material cost for each phantom was approximated at $23.98.

CONCLUSIONS

A low-cost and reusable phantom was developed based on 3D-printed molds for casting. The proposed educational prostate phantom is an ideal cost-effective platform to develop and build confidence in fundamental brachytherapy procedural skills in addition to actual patient caseloads.

Для цитирования: Chiu Tsuicheng, Xiong Zhenyu, Parsons David, Folkert Michael R, Medin Paul M, Hrycushko Brian. Low-cost 3D print-based phantom fabrication to facilitate interstitial prostate brachytherapy training program.. Brachytherapy. 2020. DOI: 10.1016/j.brachy.2020.06.015.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.