DOI 10.1016/j.diii.2021.08.005
Transbronchial lung parenchyma cryoablation with a novel flexible cryoprobe in an in vivo porcine model.
Аннотация
PURPOSE: The purpose of this study was to evaluate the feasibility and safety of transbronchial cryoablation with a novel flexible cryoprobe using nitrogen as the refrigerant in an in vivo porcine model of lung parenchyma.
MATERIALS AND
METHODS
A novel flexible cryoprobe using nitrogen as the refrigerant was used for transbronchial cryoablation of lung parenchyma in six normal female pigs. The cryoprobe was delivered to the distal bronchus in the bilateral porcine lungs via the bronchoscopic working channel under virtual bronchoscopy guidance. The position was confirmed with real-time computed tomography (CT). The whole procedure included two freeze-thaw cycles (15 min and 2 min, respectively). CT images were obtained during cryoablation and at 24 h, one week, two weeks and four weeks after the treatment to assess the effectiveness and safety of the procedure. Ablation zone tissue samples were obtained at 24 h and four weeks after the cryoablation for further histopathological analysis.
RESULTS
All ablation procedures (12/12; 100%) were performed successfully. No major complications occurred during the procedure or the observation period. The ablation zones were clearly depicted on CT with a maximal ablation zone volume at 24 h (21.88 ± 12.61 [SD] cm3) compared to 3.64 ± 2.06 (SD) cm3 and 10.73 ± 3.84 (SD) cm3 at the end of the 1st and 2nd freeze-thaw cycles, respectively (P < 0.001). Histopathological analysis revealed that a coagulative necrotic zone was formed along the target bronchus, with obvious vascular occlusion and hemorrhage 24 h after treatment. The lesions gradually formed fibrosis after four weeks.
CONCLUSION
The novel flexible bronchoscopy-guided cryoablation is a feasible, safe and effective modality in an in vivo porcine model of peripheral normal lung parenchyma, suggesting potential capabilities for the treatment of peripheral lung cancer in humans.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.