MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1259/dmfr.20150065

Медицинская библиотека · Dento maxillo facial radiology · 2015

Efficacy of lead foil for reducing doses in the head and neck: a simulation study using digital intraoral systems.

Nejaim Y, Silva A I V, Brasil D M, Vasconcelos K F, Haiter Neto F, Boscolo F N

СтатьяПеревод пока не подготовлен

Аннотация

OBJECTIVES

To assess the efficacy of lead foils in reducing the radiation dose received by different anatomical sites of the head and neck during periapical intraoral examinations performed with digital systems.

METHODS

Images were acquired through four different manners: phosphor plate (PSP; VistaScan(®) system; Dürr Dental GmbH, Bissingen, Germany) alone, PSP plus lead foil, complementary metal oxide semiconductor (CMOS; DIGORA(®) Toto, Soredex(®), Tuusula, Finland) alone and CMOS plus lead foil. Radiation dose was measured after a full-mouth periapical series (14 radiographs) using the long-cone paralleling technique. Lithium fluoride (LiF 100) thermoluminescent dosemeters were placed in an anthropomorphic phantom at points corresponding to the tongue, thyroid, crystalline lenses, parotid glands and maxillary sinuses.

RESULTS

Dosemeter readings demonstrated the efficacy of the addition of lead foil in the intraoral digital X-ray systems provided in reducing organ doses in the selected structures, approximately 32% in the PSP system and 59% in the CMOS system.

CONCLUSIONS

The use of lead foils associated with digital X-ray sensors is an effective alternative for the protection of different anatomical sites of the head and neck during full-mouth periapical series acquisition.

Для цитирования: Nejaim Y, Silva A I V, Brasil D M, Vasconcelos K F, Haiter Neto F, Boscolo F N. Efficacy of lead foil for reducing doses in the head and neck: a simulation study using digital intraoral systems.. Dento maxillo facial radiology. 2015. DOI: 10.1259/dmfr.20150065.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.