Simulating A Subcondylar Mandibular Fracture With Intraoral Open Reduction and Internal Fixation: A Novel Education Tool for Residents.

STUDY

DESIGN

Face and content validation of a surgical simulation model.

OBJECTIVE

Open reduction and internal fixation in displaced subcondylar mandibular fractures is standard care. This requires an extraoral (eg: retromandibular, transparotideal) or intraoral approach. An intraoral approach requires further training since specialized instrumentation such as the 90° screwdriver system and endoscopes might be needed. Currently, no simulation models are available for training residents in intraoral reduction and fixation of subcondylar mandibular fractures. Therefore, we present a validated simulation model for intraoral treatment of subcondylar mandibular fractures.

METHODS

Based on a computer tomography data set, we designed and printed a 3D model of a mandible with a unilateral subcondylar fracture. To simulate intraoral work depth, it was positioned inside a dental phantom. We tested the model by a group of experts (n = 8), simulating intraoral reduction and fixation of a unilateral subcondylar fracture, using a 90° screwdriver system, a 1.0 subcondylar plate (lambda), and 5-6 mm screws.We assessed Face and Content validity by survey.

RESULTS

We provided an open-source printable fracture model. Printing costs were approximately US $10. Experts "Agreed" the model resembling the real scenario and its use for training intraoral reduction and fixation of subcondylar mandibular fractures.

CONCLUSIONS

We developed a low cost, reproducible, open-source simulator for subcondylar mandibular fractures. Face and Content validity was achieved through evaluation by a group of experts.