MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1017/s0031182009005563

Медицинская библиотека · Parasitology · 2009

Excystation of Cryptosporidium parvum at temperatures that are reached during solar water disinfection.

Gómez-Couso H, Fontán-Sainz M, Fernández-Alonso J, Ares-Mazás E

Оценочное исследованиеСтатьяПоддержка исследования: вне правительства СШАПеревод в очереди

Аннотация

Species belonging to the genera Cryptosporidium are recognized as waterborne pathogens. Solar water disinfection (SODIS) is a simple method that involves the use of solar radiation to destroy pathogenic microorganisms that cause waterborne diseases. A notable increase in water temperature and the existence of a large number of empty or partially excysted (i.e. unviable) oocysts have been observed in previous SODIS studies with water experimentally contaminated with Cryptosporidium parvum oocysts under field conditions. The aim of the present study was to evaluate the effect of the temperatures that can be reached during exposure of water samples to natural sunlight (37-50 degrees C), on the excystation of C. parvum in the absence of other stimuli. In samples exposed to 40-48 degrees C, a gradual increase in the percentage of excystation was observed as the time of exposure increased and a maximum of 53.81% of excystation was obtained on exposure of the water to a temperature of 46 degrees C for 12 h (versus 8.80% initial isolate). Under such conditions, the oocyst infectivity evaluated in a neonatal murine model decreased statistically with respect to the initial isolate (19.38% versus 100%). The results demonstrate the important effect of the temperature on the excystation of C. parvum and therefore on its viability and infectivity.

Для цитирования: Gómez-Couso H, Fontán-Sainz M, Fernández-Alonso J, Ares-Mazás E. Excystation of Cryptosporidium parvum at temperatures that are reached during solar water disinfection.. Parasitology. 2009. DOI: 10.1017/s0031182009005563.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.