MedElevator Войти в исследования
← Поиск публикаций

DOI 10.1515/bmt-2022-0414

Медицинская библиотека · Biomedizinische Technik. Biomedical engineering · 2023

Biomechanical analysis of different fixed dental restorations on short implants: a finite element study.

Wagner Christian, Herberg Samira, Bourauel Christoph, Stark Helmut, Dörsam Istabrak

СтатьяПеревод пока не подготовлен

Аннотация

OBJECTIVES

Although the use of short implants is becoming more common for patients with atrophic alveolar ridges, their use is still quite limited. This is due to the lack of data of long-term survival compared to standard-length implants. The aim of this study was to determine the load in the bone and implant system with different superstructures.

METHODS

Three kinds of prosthetic restorations were created on short implants based on CT-Data. Two short implants with different macro-geometries were used. The implants were inserted in idealised posterior lower mandibular segments and afterwards restored with a crown, a double splinted crown, and a bridge.

RESULTS

The analysis was performed under load of 300 N either divided between a mesial and distal point or as a point load on the pontic/mesial crown. The different design of the implant systems had a noticeable influence on the stress in the cortical bone, in the implant system, and the displacement of the superstructure as well.

CONCLUSIONS

Compared with implants of standard length, higher stresses were observed, which can lead early failure of the implant during the healing period or a late cervical bone resorption. Precise indications are essential for short implants to avoid the failure of short implants.

Для цитирования: Wagner Christian, Herberg Samira, Bourauel Christoph, Stark Helmut, Dörsam Istabrak. Biomechanical analysis of different fixed dental restorations on short implants: a finite element study.. Biomedizinische Technik. Biomedical engineering. 2023. DOI: 10.1515/bmt-2022-0414.

Предметные рубрики MeSH

Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.