Sensitivity of Inter-Point Distance Measurement to Control-Point Coordinate Error in a Panoramic Camera.
Аннотация
Vision-based traffic monitoring recovers metric quantities such as inter-vehicle distances by mapping the image to the ground plane through a planar homography. In deployed systems, this homography is often fitted from ground control points whose world coordinates are obtained from satellite orthoimagery, where each coordinate is uncertain by about one image pixel. The impact of this control-point coordinate error on the measured distance has not been quantified for a single fixed camera. This paper evaluates a 180-degree panoramic camera (AXIS P3807-PVE) on two adjacent ground-plane regions, each referenced to RTK-surveyed control points and mapped by a separate homography. Control-point coordinates are perturbed with isotropic Gaussian noise, the homography is refitted, and the resulting change in inter-point distance between held-out evaluation points is measured against the unperturbed fit. The distance error is dominated by random scatter rather than systematic bias, and the scatter grows approximately linearly with the coordinate noise, at about 0.7 to 0.8 times the per-coordinate standard deviation within the tested range. The results indicate that distance error can be predicted from control-point coordinate accuracy, and that relative precision of those coordinates matters more than absolute georeferencing.
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.