A Novel Semi-Cannulated Screw with Cement Augmentation for Revision Lateral Mass Fixation: A Cyclic Loading Biomechanical Study.
Аннотация
UNLABELLED: Dongbin Qu, Division of Spine Surgery, Department of Orthopaedics, Nanfang Hospital, Southern Medical University, Guangzhou, Guangdong 510000, P. R. China. Email: nfyy_qu@126.com Canyang Huang, Division of Spine Surgery, Department of Orthopaedics, Quanzhou First Hospital Affiliated to Fujian Medical University, Quanzhou, Fujian 362000, P. R. China. Email: huangcy0595@sina.com Purpose: This study biomechanically compared a novel semi-cannulated lateral mass screw with cement augmentation against conventional solid screws for stabilizing loosened cervical lateral masses under cyclic loading.
METHODS
Eight fresh human cervical specimens underwent μCT scanning for BMD assessment. Each specimen received both screw types: on the augmentation side, semi-cannulated screws were initially loosened via pull-out testing then reinserted with cement; on the (contralateral) primary side, conventional solid screws were placed Awithout augmentation. After cyclic loading, vertical displacement, toggling angle, and rotation center distance (ORC) at the screw-bone interface were measured, followed by final pull-out force tests.
RESULTS
The mean BMD of the lateral masses was 305.05 ± 48.33 mg/cm³. Following cyclic loading, the augmentation side exhibited a significantly higher pull-out force than its initial state (P < 0.01), though not statistically greater than the primary side. Under cyclic loading, the augmentation side demonstrated significantly superior stability: vertical displacement increased by only 6.25%, compared to a 70.69% increase on the primary side (P < 0.05). The toggling angle decreased by 2.36% on the augmentation side, versus a significant 79.92% increase on the primary side (P < 0.05). The ORC increased by 2.13% on the augmentation side, markedly lower than the 38.03% increase on the primary side.
CONCLUSION
The novel semi-cannulated lateral mass screw with cement augmentation demonstrated superior dynamic stability and significantly improved fixation strength after cyclic loading compared to conventional solid screws, offering a promising revision strategy for cervical spines with screw loosening or osteoporosis.
Предметные рубрики MeSH
Подготовка и перевод публикации
Обработка статьи · этапы, ошибки и управление
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Тип публикации указан по данным источника. Уровень доказательности автоматически не присваивается.