Influence of Mold Design and Molding Conditions on the Optical Properties of Contact Lenses.

Injection molding is essential for mass-producing soft contact lenses, yet molding-induced deformation remains a decisive factor for optical quality. This study systematically evaluated the impact of resin mold design factors (optical zone (OZ) radius of curvature and resin mold thickness) and injection molding parameters (holding pressure and injection speed) on the properties of a dry-state lens (dry lens) using an L18 orthogonal array. The results demonstrated that optimizing the resin mold thickness to 0.9 mm reduced astigmatism by approximately 95%, while high holding pressure and low injection speed improved structural stability. Notably, the findings suggest that the refractive power of the dry lens is more strongly governed by macro-level curvature fluctuations and internal stress distributions arising from the resin mold thickness and shape than by the wavefront aberrations of the resin mold itself. Designs with a smaller radius of curvature (R = 6.5 mm) exhibited substantial power deviations of up to +2.8 D, whereas deviations remained within ±0.2 D for designs with a larger radius of curvature (R = 8.5 mm). For high-precision lens manufacturing, it is indispensable to incorporate a resin mold design that accounts for deformations induced during molding. This study provides comprehensive guidelines for achieving high-quality products by detailing the relationship between injection molding and design.