MedElevator Войти в исследования
Открытая медицинская библиотека

Результаты поиска

Медицинские публикации, первоисточники и полные тексты.
Для клинического вопроса, нового знания и следующего исследования.

Ищем по исходному запросу. Уточняем медицинские термины для поиска на других языках…

Результаты поиска

1 333 публикаций

Поиск: 31 мс
Публикации на разных языках · PubMed, Europe PMC и данные издателей через Crossref · 157 с найденным полным текстом
Выберите статьи для научной работыПосле входа — выбор статей и сборка документа

Comparative effect of polishing and coatings on the surface properties of 3D-printed denture-base resin and teeth: an in vitro study.

BACKGROUND: The surface properties of three-dimensional (3D)-printed resins remain an area requiring further improvement. Therefore, this study aimed to evaluate the effects of different polishing and coating protocols on the surface roughness and hardness of 3D-printed denture base resins (DBRs) and denture teeth. METHODS: Two 3D printed resins (ASIGA and NextDent) for DBRs and denture teeth were used to fabricate disk-shaped (15 ×2 mm) specimens. Per resin, 96 specimens (48 for denture base and 48 for teeth) were divided into 4 groups (n=12) according to surface treatment: no polishing-coat

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42835914Открыть статью

Evaluating the impact of print orientation and layer thickness on mechanical properties of three-dimensional-printed denture base resin.

AIM: Layer thickness and print orientation are important printing considerations that influence the mechanical performance of additively manufactured denture base resins. However, evidence regarding their combined effects remains limited. The study investigated the influence of print orientation and layer thickness on the flexural strength, fracture toughness, surface roughness, and impact strength of an additively manufactured digital light processing (DLP) denture base resin. STUDY SETTING AND DESIGN: In vitro comparative study. MATERIALS AND METHODS: Using a DLP-based three-dimensional pr

СтатьяСравнительное исследованиеПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42825624Открыть статью

Impacts of surface characteristics on biological responses and biofilm formation of 3D-printed denture base resins: An in vitro study.

BACKGROUND/PURPOSE: With advancements in digital technology, fully digital workflow for complete denture fabrication using 3D-printed denture base resin (DBR) has gained increasing clinical acceptance in recent years. However, the surface characteristics, biocompatibility, and biofilm formation of 3D-printed DBR materials remain insufficiently understood. Therefore, in this study, we investigated and analyzed these aspects. MATERIALS AND METHODS: Disk-shaped DBR specimens (Ø 2.5 mm, 3 mm thick) were fabricated using packed (PA), milled (ML), and 3D-printed (3D) processes. All specimens were g

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 40654487Открыть статью

The Effect of Manufacturing Factors on the Material Properties and Adhesion of C. albicans and S. mutans on Additive Denture Base Material.

(1) Understanding the effects of manufacturing factors on microbial adhesion is essential for optimizing additive denture base materials and improving their clinical performance. This study evaluated how polymerization time, layer thickness, extended cleaning, and storage conditions influence C. albicans and S. mutans adhesion on a denture base material. (2) Specimens (n = 15/group, d = 8 mm, h = 2 mm) were additively fabricated or poured (reference). Digital light processing was performed with varying polymerization times, layer thicknesses, extended cleaning, and storage. Microbial adhesion

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 40141606Открыть статью

Feasibility of microencapsulated phytochemical as disinfectant for inhibition of Candida albicans proliferation on denture base produced by digital light processing.

BACKGROUNDS: A proper disinfection of denture is vital to prevent a fungal infection. A study on the feasibility of microencapsulated phytochemical as complementary disinfectant and its interaction with effervescent tablet immersion on denture base resin is lacking. OBJECTIVES: The aim of this study was to examine the feasibility of phytochemical-filled microcapsules as disinfectant for the inhibition of Candida albicans (C. albicans) attachment on the denture base produced by digital light processing (DLP). METHODS: 54 denture base specimens uniformly mixed with or without 5wt% phytochemica

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 37437045Открыть статью

Hydrophilic surface modification of acrylic denture base material by silica coating and its influence on Candida albicans adherence.

Silica coating modifies hydrophobic denture base materials to have a hydrophilic surface. The purpose of this study was to evaluate the effect of silica coating to a denture base material on resistance to Candida albicans (C. albicans) adherence. Specimens were prepared by polymerizing an acrylic denture lining material and polished using silicon carbide paper up an abrasive grade of 1000. The specimens of a coated group were treated three times by a silica coating agent using a nonwoven cloth. The surface properties were evaluated by contact angle measurement, scanning electron microscopy (SE

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 23896959Открыть статью

Clinical applications of visible light-cured resin in maxillofacial prosthetics. Part I: Denture base and reline material.

A visible light-cured resin system enables the dentist to accomplish chairside relining of removable prosthesis. The material is pliable and can be initially cured in the mouth with the regular hand-held visible light. A special unit is needed to completely cure the material, which thereafter is comparable in quality to heat-polymerized acrylic resin. The value of this system for the practice of maxillofacial prosthetics is demonstrated by the ease of relining of various devices and obturator prostheses.

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 2090819Открыть статью

Adherence assessment of Candida albicans on CAD/CAM and conventional resin for denture base: A systematic review and network meta-analysis.

PURPOSE: To evaluate whether Candida albicans adhesion differs between denture base resins fabricated using computer-aided design/computer-aided manufacturing (CAD/CAM; milled or 3D-printed) systems and those fabricated using conventional heat-polymerized resin (HPAR). STUDY SELECTION: This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) and PRISMA-Network Meta-Analyses (PRISMA-NMA) guidelines. The research question was, "For the fabrication of denture bases, are resins from the CAD/CAM system more prone to Candida albicans adhesion c…

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41605677Открыть статью

Impact of salivary media on sustained silver release and the structural stability of silver nanomodified polymethyl methacrylate denture base resin.

STATEMENT OF PROBLEM: Silver nanoparticle (AgNP)-modified denture base materials can reduce biofilm-induced oral inflammatory lesions such as denture stomatitis because of the release of bioactive silver ions. However, whether the release of silver ions is sustained when exposed to human saliva and their effect on the molecular structure of the denture base resin are unclear. PURPOSE: The purpose of this in vitro study was to assess the influence of salivary media on the sustained release of silver ions from a modified-denture base resin and to determine their effect on the molecular structur

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41605763Открыть статью

Surface roughness and color stainability of conventional, subtractive, and additive denture base materials after brushing and staining: An in vitro study.

STATEMENT OF PROBLEM: Thermal aging, brushing, and staining may compromise the surface and optical behavior of denture base materials. Evidence is limited regarding the combined effects of these conditions on conventionally processed, subtractively manufactured (SM), and additively manufactured (AM) resins. PURPOSE: The purpose of this in vitro study was to compare the surface roughness (Ra) and color stainability (ΔE00) of denture base resins fabricated using conventional, SM, and AM methods after brushing and immersion in staining media. MATERIAL AND METHODS: A total of 180 disk-shaped spe

СтатьяСравнительное исследованиеПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42331661Открыть статью

Influence of Different Materials for Extrinsic Characterization on the Properties of CAD-CAM Denture Base Resins: A Systematic Review of In Vitro Studies.

PURPOSE: The objective was to investigate whether extrinsic characterization composite/pigment influence the surface, mechanical, optical, and biological properties of resin-based CAD-CAM denture bases. MATERIALS AND METHODS: This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines and was registered in the Open Science Framework (OSF (10.17605/OSF.IO/W25KU). An independent electronic search was conducted by 2 reviewers in PubMed/MEDLINE, Cochrane Library, Scopus, Web of Science, Embase, ProQuest, and OpenGrey to identify studi…

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42752503Открыть статью

Effect of glycerol-assisted ultraviolet postcuring duration on residual monomer release from 3D-printed denture base resins.

AIM: The widespread use of printable resins contrasts with the limited evaluation of residual monomer release, that remains a significant concern for biocompatibility. Fewer studies estimated the monomer releases in printable denture base resins. The study evaluated the effect of glycerol-assisted UV post-curing at different time intervals on residual monomer release from 3D printed denture base resin. STUDY SETTING AND DESIGN: Invitro experimental study. MATERIALS AND METHODOLOGY: Forty standardized specimens of 50 mm diameter × 3 ± 0.1 mm thickness were made using a DLP 3D printer in accor

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42390496Открыть статью

Advanced dual-cured resin with excellent mechanical properties, printing accuracy, and biocompatibility for the application of 3D printing denture base.

OBJECTIVE: Although DLP-based 3D printing shows great potential for dental restorations, it is still limited by poor fracture toughness and … fety. SIGNIFICANCE: This research verified the feasibility of a dual-cured system for DLP printing denture bases, providing an advanced solution for addressing brittleness and polymerization shrinkage in 3D printing denture base materials.

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42502033Открыть статью

Effects of simulated long-term exposure to bottled, neutral pH electrolyzed oxidizing water on the properties of denture base resins.

STATEMENT OF PROBLEM: Denture stomatitis can pose serious health risks, especially to older people. Chemical denture cleaning agents must be effective, yet not adversely affect the longevity of removable dentures. Ready-to-use (RTU) neutral pH electrolyzed oxidizing water (EOW) is an effective biocide against Candida albicans biofilms on denture resins, but the effects of daily disinfection with EOW on the physical and mechanical properties of resins have not been established. PURPOSE: The purpose of this in vitro study was to investigate the effects of simulated long-term exposure to RTU EOW

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 38622046Открыть статью

THE EFFECT OF MONOMER OF REMOVABLE DENTURE BASE RESIN ON THE STRUCTURAL ORGANIZATION OF THE GLANDULAR ZONE OF ALBINO RAT HARD PALATE IN THE EXPERIMENT.

OBJECTIVE: The aim: The paper presents the findings of the study of the 3 month-long effect of the monomer of the "Ftorax" denture base acrylic resin on the structural organization of the mucous membrane and the condition of the salivary glands of the albino rats' hard palate during the experiment. PATIENTS AND METHODS: Materials and methods:To achieve this goal, experimental studies involved mature rats, whose hard palate mucosa was smeared with 2% aqueous solution of the monomer of the "Ftorax" denture base acrylic resin twice a day in the morning and evening. The animals were sacrificed on

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 33577487Открыть статью

Light-curing reinforcement for denture base resin using a glass fiber cloth pre-impregnated with various urethane oligomers.

The purpose of this study was to investigate the flexural properties of denture base resin reinforced using glass fiber cloth and a urethane oligomer. The five types of oligomer used in this study were S5, S9, S3, U4, and U6, which have varying functional groups and viscosities. The flexural properties of S9 with glass fiber cloth could not be measured because S9 is elastic. In the heat-cured resin reinforced with S9, the reinforcement peeled away from the resin. In the self- and light-cured resins reinforced with S9, the flexural properties increased significantly. When reinforced with the ot

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 15510856Открыть статью

Efficacy of indocyanine green-mediated photodynamic therapy in the treatment of Candida albicans-penetrated denture base material: an in vitro study.

BACKGROUND: Denture stomatitis is a frequently encountered inflammatory condition among complete denture wearers. Candida species are the principal etiological agents and are capable of colonizing both the denture surface and surrounding oral tissues, as well as infiltrating the denture base material. Effective management necessitates the elimination of microorganisms from both surface and subsurface regions of the denture. Therefore, the aim of the present study was to evaluate the efficacy of indocyanine green (ICG)-mediated photodynamic therapy (PDT) against C. albicans inside acrylic resin

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42907967Открыть статью

Characterization, antimicrobial activity, biocompatibility, and inflammatory response of 3D-printed denture base resin functionalized with alpha-silver tungstate.

PURPOSE: We functionalized a three-dimensionally (3D) printed denture base resin with α-Ag2WO4 microcrystals and evaluated its chemical and surface properties, flexural strength, antimicrobial activity, biocompatibility, and inflammatory response. METHODS: Resin specimens were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The surface roughness was evaluated by profilometry and wettability, whereas the surface free energy was determined using a goniometer. The flexural strength of the resin was assessed by t

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41813160Открыть статью

Evaluation and Comparison of Ketoconazole and Alkaline Glutaraldehyde Effects on Candida albicans Adherence to Three Denture Base Materials: An In Vitro Study.

INTRODUCTION: This study aimed to evaluate and compare the effects of two antimicrobial agents, ketoconazole and alkaline glutaraldehyde, on Candida albicans (C. albicans) adherence to three denture base materials: conventional heat-cured polymethyl methacrylate (PMMA), flexible denture base material, and injectable denture base material. The objectives of this study were to assess the efficacy of ketoconazole in reducing C. albicans adherence, evaluate the effectiveness of alkaline glutaraldehyde in preventing microbial attachment, and compare the performance of both agents across the tested

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 40909030Открыть статью

Effect of surface priming on the wettability of heat-polymerized polymethylmethacrylate, milled and 3D printed denture base polymers: An in vitro study.

OBJECTIVE: Computer-aided design and computer-aided manufacturing (CAD-CAM) complete dentures are commonly used with adhesives, relines, and … .001). The primed heat-polymerized PMMA (73.6 ± 0.9°), 3D printed PMMA (76 ± 0.7°), and milled PMMA denture bases (64.6 ± 0.5°) exhibited high contact angles with distilled water, suggesting poor wettability to this liquid. Without priming, the distilled water contact angle was lower for the 3D printed photopolymer (53.6 ± 0.9°), milled PMMA (48.2 ± 0.8°), and …

СтатьяСистематический обзорПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41205990Открыть статью