Calcium phosphate (CaP) coatings were electrochemically deposited on titanium substrates. By increasing the electrodeposition time (from 1 to 30 min), the coating thickness increases but also the surface morphology of the CaP coatings is greatly affected going from smooth to plate-like, featuring elongated plates, ribbon-like and finally sharp needle structures. Micro-stretch tests reveal that, regardless of the coating morphology and thickness, the electrodeposited CaP coatings have strong adhesion with the titanium substrates and their failure mode is cohesive failure. The effects of differe
СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Achieving the stable osteointegration of prosthetic implants is one of the great challenges of modern orthopedic surgery. The fixation of ceramic acetabular cups of hip joint prostheses is usually achieved using a metal shell provided with screws or pegs that penetrate into the host pelvic bone. The deposition of bioactive coatings on the implant surface to be put in contact with bone could be a valuable strategy to promote a more "physiological" osteointegration. In this work, bioactive glass porous coatings were manufactured on the top of alumina/zirconia composite implants by two different
СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
An oronasal fistula is a passage between the oral and nasal cavity. Currently, surgical procedures use mucosal flaps or collagen grafts to make a barrier between oral and nasal cavities. Our aim was to develop a cell-free synthetic repair material for closure of nasal fistulas. We surface functionalized electrospun polyurethane (PU) and poly-L-lactic acid (PLLA) and composite polymer (PU-PLLA) membranes with acrylic acid through plasma polymerization. Membranes were treated in a layer-by-layer approach to develop highly charged electrostatic layer that could bind heparin as a pro-angiogenic gl
СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
In the current work, an intestinal anastomosis ring made of magnesium‑zinc‑strontium (Mg-Zn-Sr) alloy was developed and fabricated in order to take advantages of the appropriate biocompatibility and degradability of Mg-based alloys. As-fabricated anastomosis rings were implanted into the intestinal tracts of Bama miniature pigs to evaluate their biological performance in vivo. At the injury site, the formation of edema and granulation tissue was observed for 2 weeks after surgery. Till week 4, the edema transformed to firm scar tissue, which reached the healing standard of intestinal tissue. T
СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
The major challenge to treat the clinical adverse effects of long-segment urethra is in achieving viable tissue substitution. The substituted construct's properties-such as its resilience, contraction, and ability to minimize scar-stenosis formation should be considered. In the present work, a unique polyurethane-urea (PUU) fibrous membrane is fabricated by electrospinning. Then PUU was coated by collagen and formed the elasticity hydrogel after immersed in collagen solution. Meanwhile, the cPUU hydrogel exhibited a fibrous microstructure. This cPUU hydrogel had outstanding stretching property
СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
The long-term performance of many medical implants is limited by the use of inherently incompatible and bioinert materials. Metallic alloys, ceramics, and polymers commonly used in cardiovascular devices encourage clot formation and fail to promote the appropriate molecular signaling required for complete implant integration. Surface coating strategies have been proposed for these materials, but coronary stents are particularly problematic as the large surface deformations they experience in deployment require a mechanically robust coating interface. Here, we demonstrate a single-step ion-assi
СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Mimicking three dimensional microstructural scaffolds with their requisite mechanical properties in relation to human bone is highly needed for implant applications. Various biocompatible polymers and bioactive glasses were synthesized to achieve these properties. In the present study, we have fabricated highly porous and bioactive PMMA-Bioglass scaffolds by the phase separation method. Chloroform, acetone and an ethanol-water mixture were used as the different solvent phases in preparing the scaffolds. Large interconnecting pores of sizes ∼100 to 250 μm were observed in the scaffolds and a po
СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Total joint replacements currently have relatively high success rates at 10-15 years; however, increasing ageing and an active population places higher demands on the longevity of the implants. A wear resistant configuration with wear particles that resorb in vivo can potentially increase the lifetime of an implant. In this study, silicon nitride (SixNy) and silicon carbon nitride (SixCyNz) coatings were produced for this purpose using reactive high power impulse magnetron sputtering (HiPIMS). The coatings are intended for hard bearing surfaces on implants. Hardness and elastic modulus of the
Сравнительное исследованиеОценочное исследованиеСтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
The aim of this study was using a novel antimicrobial thermoplastic plasticizer based on aliphatic anhydride derivative dodecenyl succinic anhydride (DSA) for blending poly (vinyl chloride), PVC, with gelatin in presence of montmorillonite (MMT) using Brabender via polymer melting technique. This anhydride-based plasticizer blended the membrane ingredients homogenously under melting process. The used plasticizer exhibited high performance antimicrobial potency for some biomedical and industrial applications. The prepared biocomposite films were evaluated for antimicrobial activity using agar d
СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Complement activation by polymeric gene and drug delivery systems has been overlooked in the past. As more reports appear in the literature concerning immunogenicity of polymers and their impact on gene expression patterns, it is important to address possible immune side effects of polymers, namely complement activation. Therefore, in this study the activity of low and high molecular weight poly(ethylene imine) and two PEGylated derivatives to induce complement activation were investigated in human serum. These in vitro results revealed that PEI 25 kDa caused significant and concentration depe
Оценочное исследованиеСтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
OBJECTIVES: To characterize the interaction of 1-Ethyl-3-[3-dimethylaminopropyl] carbodiimide Hydrochloride (EDC) with dentin matrix and its effect on the resin-dentin bond.
METHODS: Changes to the stiffness of demineralized dentin fragments treated with EDC/N-hydroxysuccinimide (NHS) in different solutions were evaluated at different time points. The resistance against enzymatic degradation was indirectly evaluated by ultimate tensile strength (UTS) test of demineralized dentin treated or not with EDC/NHS and subjected to collagenase digestion. Short- and long-term evaluations of the strengt
Оценочное исследованиеСтатьяПоддержка NIH: внешняя программаПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
The data for long-term drug-delivery systems are scarce compared to the short-term systems because the required research efforts are more time-consuming. In this study, we report a novel cross-linked composite based on poly(vinyl alcohol) (PVA) containing cupric ions for long-term delivery, which is helpful for contraception and trace element balance in the human body. The composition, corrosion products, crystal structure, chemical structure and mechanical stability of the composite, after being immersed in simulated body fluid (SBF) for one year, were studied by X-ray fluorescence spectrosco
СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
The most frequent complication in external fixation is pin tract infection. To reduce the incidence of implant-associated infection, many published reports have looked at preventing bacterial adhesion by treating the pin surface. This study aimed to evaluate the antibacterial activity of a Titanium-Copper (Ti-Cu) alloy on implant infection, and to determine the potential use of the Ti-Cu alloy as a biomaterial. Two forms of Ti-Cu alloys were synthesized: one with 1% Cu and the other with 5% Cu. For analyzing infectious behavior, the implants were exposed to Staphylococcus aureus and Escherichi
Оценочное исследованиеСтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Posttraumatic peripheral nerve repair is one of the major challenges in restorative medicine and microsurgery. Despite the recent progresses in the field of tissue engineering, functional recovery after severe nerve lesions is generally partial and unsatisfactory. Autograft is still the best method to treat peripheral nerve lesions, although it has several drawbacks and does not allow complete functional recovery. Full recovery of nerve functionality could ideally be achieved by proper guiding axon regeneration toward the original target tissues, through the use of purposely engineered artific
СтатьяОбзорПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
The aim of this work is to examine the corrosion properties, chemical composition, and material-implant interaction after different periods of implantation of plates used to correct funnel chest. The implants are made of 316L stainless steel. Examinations are carried out on three implants: new (nonimplanted) and two implanted for 29 and 35 months. The corrosion study reveals that in the potential range that could occur in the physiological condition the new bar has the lowest current density and the highest corrosion potential. This indicates that the new plate has the highest corrosion resist
СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Osteolysis is a multifactorial process dependent on surgical technique, implant design, patient factors, and material composition. Alternative bearing surfaces, such as highly cross-linked polyethylene, ceramic-on-ceramic, and metal-on-metal articular surfaces, have been introduced in an attempt to reduce wear and osteolysis following total hip arthroplasty. Intermediate-term follow-up data available suggest that the prevalence and severity of osteolysis may be reduced with these materials compared with conventional metal-on-polyethylene bearing surface couples. However, long-term data are pre
СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Bioactive glass nanoparticles synthesized by flame spray synthesis were tested for their remineralization capabilities in vitro. After artificial demineralization with EDTA, human dentin was treated with 20-50nm size bioactive glass nanoparticles or a micrometer-sized, commercial reference material (PerioGlas) for up to 30 days. The degree of remineralization was measured using quantitative gravimetric methods (thermogravimetry, elemental analysis) and element-sensitive scanning electron microscopy imaging to detect new mineral precipitated on or within the demineralized tooth matrix. After tr
СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Previous studies from our lab have shown that fibrinogen adsorption (Gamma(Fg)) must be reduced below 10 ng/cm(2) to significantly reduce platelet adhesion, and that radio frequency glow discharge (RFGD) treatment of polymeric films in the presence of tetraethylene glycol dimethyl ether (tetraglyme) can reduce Gamma(Fg) to the desired ultralow value. In this report, the effects of RFGD coatings of tetraglyme on the lumenal surface of PE tubing on Gamma(Fg) and on blood interactions both in vitro and ex vivo are described. Gamma(Fg) on the tetraglyme-coated PE tubing was reduced to the desired
СтатьяПоддержка NIH: внешняя программаПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Gamma-cyclodextrin is an eight glucose unit conical structure, which possesses a hydrophobic internal cavity exhibiting supramolecular complexing properties and a hydrophilic exterior due to the presence of hydroxyl groups. In this work, we have synthesized for the first time a functionalized stable film of poly-3-methylthiophene combined with gamma-cyclodextrin (P3MT/gamma-CD) in tetrabutylammonium hexafluorophosphate/acetonitrile solution. A potentiostatic mode was employed for the film growth. Cyclic voltammetry and electrochemical impedance spectroscopy were used for the characterization o
Сравнительное исследованиеОценочное исследованиеСтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.
Hydroxyapatite (HA) and other calcium phosphates were synthesized on titanium plates by a solid-gas state reaction of sputtered CaO and vaporized P(2)O(5). The calcium phosphates formed were HA, beta-tricalcium phosphate (beta-TCP; Ca(3)(PO(4))(2)), beta-calcium pyrophosphate (beta-PYR; Ca(2)P(2)O(7)), and beta-calcium metaphosphate (beta-MET; Ca(2)(PO(3))(2)). Their formation depended on the ratio of the sputtered CaO and the reacting P(2)O(5). For a mole ratio of CaO/P(2)O(5)=4 (Ca/P=2), an HA film was synthesized. The surface roughness increased by over seven times after the solid-gas state
Сравнительное исследованиеОценочное исследованиеСтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…
Ошибки и ограничения
История · было → стало
Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.