MedElevator Войти в исследования
Открытая медицинская библиотека

Результаты поиска

Медицинские публикации, первоисточники и полные тексты.
Для клинического вопроса, нового знания и следующего исследования.

Ищем по исходному запросу. Уточняем медицинские термины для поиска на других языках…

Результаты поиска

39 327 публикаций

Поиск: 77 мс
Публикации на разных языках · PubMed, Europe PMC и данные издателей через Crossref · 3 478 с найденным полным текстом
Выберите статьи для научной работыПосле входа — выбор статей и сборка документа

Surface Layer Engineering of 3D-Printed PET-G: Effect of Printing Parameters on Surface Roughness and Wettability-Considerations for Tribological Applications.

The aim of this study was to investigate the effect of 3D printing parameters on the surface topography and surface wettability properties of PET-G samples intended for potential tribological applications. Surfaces produced with varying fill rates and two layer heights were examined using focus variation microscopy and water contact angle measurements. The statistical analysis showed that the infill percentage has a significant influence on wettability, but did not reveal a significant influence of layer height on the observed contact angles. The results showed that surface characteristics are

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42738199Открыть статью

Rotary Piston Valve with Surface-Engraved Microfluidic Channels for Cassette-Based Nucleic Acid Detection.

Point-of-care testing (POCT) plays a crucial role in both clinical- and home-based diagnostics. Integrated POCT systems that combine nucleic acid extraction with detection provide significant advantages, including portable operation, rapid processing, and high sensitivity. In this work, we present a fully automated and integrated nucleic acid detection system based on microfluidic chips with a surface-engraved rotary piston (SERP), which incorporates all of the liquid channels on the surface of one valve. This design consists of only three parts: the chip, the rubber sealing ring, and the rota

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42915938Открыть статью

Lipid Nanoparticle Surface Engineering with Heparosan Polysaccharides Enhances mRNA Efficacy via Reduced Endosomal Retention.

In this study, we developed a library of mRNA lipid nanoparticles (LNPs) containing clinically used ionizable lipids. We surface-modified these nanoparticles with heparosan polysaccharides and systematically compared their performance with conventional poly(ethylene glycol) (PEG)-modified formulations. Our heparosan (HEP)-coated LNPs increased mRNA expression in dendritic and macrophage cell lines by up to ∼10-fold. Mechanistic studies using live-cell imaging and intracellular nanoparticle trafficking analysis revealed that HEP-modified LNPs exhibited reduced colocalization with late endosomal

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42915664Открыть статью

Effect of Ceramic Veneering on the Metallurgical Properties of Cobalt-Chromium Alloys Fabricated Using Different Techniques.

This study was designed to assess the interface between ceramic and cobalt-chromium (Co-Cr) and to detect changes in the alloys microstructure after ceramic layering. Thirty disks (n = 36) were fabricated from cobalt-chromium (Co-Cr) alloys, cast, milled, and selective laser melting (SLM) (n = 12 in each group). Half of each group (n = 5) were observed as initially fabricated. The remaining disks were ceramic veneered. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were used to observe the morphology and chemical-analysis of the materials. Non-veneered disks

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42870654Открыть статью

Effect of Resin Cement Viscosity and Thickness on the Shear Bond Strength of a Lithium Disilicate Glass-Ceramic.

OBJECTIVE: To assess how resin cement viscosity and thickness influence the static shear bond strength (s-SBS) of adhesively bonded lithium disilicate ceramic. METHODS: Cylindrical lithium disilicate samples were prepared and randomly assigned to four experimental groups (n = 10), based on two factors: resin cement thickness (thin ≈50 µm or thick ≈150 µm) and viscosity (high or low). A tri-layer configuration (ceramic-resin cement-ceramic) was used, with standardized ceramic discs obtained from CAD/CAM blocks. The bonding ceramic surfaces were etched with hydrofluoric acid, silanized, and a d

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41780128Открыть статью

Optical properties and long-term aging under simulated oral conditions of monolithic four-unit fixed dental prostheses manufactured from gelcast zirconia discs.

OBJECTIVES: To investigate whether microstructural optimization of 3Y-TZP dental zirconia by colloidal gelcasting improves mechanical reliability, aging resistance, and optical properties of monolithic four-unit fixed dental prostheses (FDPs) compared with a conventionally processed reference material. METHODS: Zirconia discs were fabricated using either colloidal gelcasting or conventional industrial processing and subsequently CAD/CAM-milled into four-unit FDPs (n = 8 per group). After sintering, specimens were subjected to hydrothermal aging with dynamic loading for 5 million cycles. Fract

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42230251Открыть статью

Vibration-controlled extrusion-based 3D-printing of graphene-hydroxyapatite scaffolds: structural, mechanical, and electrical insights.

This study presents a comprehensive investigation into the effects of nonlinear vibrational regimes on the structural and functional integrity of reduced graphene oxide- hydroxyapatite (rGO-HA) scaffolds fabricated via extrusion-based 3D-printing. A coupled Van der Pol-Duffing oscillator model was developed to simulate vibrational dynamics during deposition, and its influence was experimentally validated using MEMS accelerometry and scaffold characterization. rGO-HA composite powders were synthesized via hydrothermal methods and formulated into inks with varying HA content. Scaffolds printed u

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42300116Открыть статью

Protective effects of herbal toothpastes against dentin erosion: an in vitro study.

This in vitro study evaluated the protective effects of different herbal and bioactive toothpaste formulations on dentin surfaces exposed to erosive challenges. A total of 96 dentin specimens were prepared from 48 human molars and randomly assigned to six groups (n = 16), each receiving one of the following treatments: fluoride-containing toothpaste, clove-containing toothpaste, propolis-containing toothpaste, fluoride combined with nano-hydroxyapatite (F+nHAp), nano-hydroxyapatite toothpaste (nHAp), and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) based toothpaste. The specimen

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42185553Открыть статью

Photoelectrochemical interface mediated by S-scheme charge transfer and p-n heterojunction: Ultrasensitive detection of the emerging contaminant ornidazole.

Ornidazole (ONZ) is a widely used nitroimidazole-class antibiotic whose environmental persistence due to misuse intensifies antimicrobial resistance and accelerates pathogen evolution, posing serious risks to human health and ecological safety. To address this issue, we developed a novel photoelectrochemical (PEC) sensor for ultrasensitive ONZ detection based on a p-n heterojunction between pseudobrookite-type oxide MgTi2O5 and the metal-organic framework (MOF) Cu-BTC. Density functional theory (DFT) calculations corroborate the favorable band structure of the heterojunction. The built-in elec

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42241888Открыть статью

[Biocompatibility assessment of a PDMS-CHXG antibacterial coating on titanium].

PURPOSE: To evaluate the biocompatibility of polydimethylsiloxane-chlorhexidine (PDMS-CHXG) coatings constructed on titanium surfaces. METHODS: Titanium discs were modified with a PDMS coating, onto which CHXG was grafted at concentrations of 0.4, 0.8, and 1.6 mg/mL. The samples were randomly divided into 5 groups: Ti group (the control group), P group (PDMS only), C1 group (PDMS with 0.4 mg/mL CHXG), C2 group (PDMS with 0.8 mg/mL CHXG) and C3 group (PDMS with 1.6 mg/mL CHXG). Surface characteristics were examined using scanning electron microscopy (SEM) and energy dispersive X-ray spectrosco

Аннотация на английскомСтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42736237Открыть статью

ThermalTexture: Temperature-Integrated Surface Rendering Using Thermal Referral Induced by Texture Slip-Feedback.

Thermal-vibration feedback has been reported to elicit the thermal referral phenomenon, offering new possibilities for enhancing user experience. Yet, little research has explored whether thermal referral occurs in the presence of texture-slip feedback. To address this, we developed a custom haptic device capable of delivering integrated thermal and slip feedback to the middle and distal phalanges of an index finger. We primarily estimated the thermal referral occurrence under passive and active touch conditions across two different perceptual experiments, while each further examined its impac

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41870926Открыть статью

Nano-bio interfacial effects modulating protein adsorption in dialdehyde lentinan-Crosslinked polysaccharide sponges reinforced with zein nanoflowers.

The interfacial organization of porous biomaterials critically influences protein adsorption and subsequent cell-material interactions at hydrated biointerfaces relevant to wound-contacting environments. Herein, hybrid sponges were developed by rationally assembling chitosan, lentinan, levan, and fucoidan into a covalently defined macromolecular network featuring nano-bio interfacial effects. The materials were designed to modulate interfacial biological performance via engineered pore-wall structures, with protein-layer formation at sponge interfaces associated with downstream cell-material r

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41825287Открыть статью

The study of the deposition process of bambus[6]uril on the porous TiNi surface using various physical methods.

This study investigates new composite porous titanium nickelide-based materials, which have been obtained for the first time by functionalizing their surface with a promising macrocyclic compound-bambus[6]uril. Such functionalization aims to enhance the hemocompatibility and cytocompatibility of bone implants, addressing issues of uncontrolled drug release and poor implant integration. The surface modification was carried out by applying bambus[6]uril in the form of a dispersion using various physical methods such as immersion, vacuum treatment, and ultrasonic exposure. The obtained materials

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41791224Открыть статью

Effect of Successive Bleaching Treatments Followed by Staining on Color, Whiteness, and Translucency of Polymer-Based CAD-CAM Materials.

OBJECTIVE: To evaluate differences in color, whiteness, and translucency of CAD-CAM materials after successive bleaching treatments and coffee immersion. MATERIALS AND METHODS: Lava Ultimate (LU) and VITA Enamic (VE) were divided into four groups (n = 12): untreated (control), 35% hydrogen peroxide (WH), 10% carbamide peroxide (OP), or WH followed by OP (WHOP). Color measurements were taken at baseline (T 0) and after three consecutive bleaching sessions, each followed by coffee exposure (T 1, T 2, and T 3). Differences in color (ΔE 00), whiteness (ΔWID), and translucency (ΔRTP00) were statis

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42037001Открыть статью

Impact of soy- and milk-based yogurts on enamel preservation: erosion and abrasion under simulated conditions.

OBJECTIVES: This study evaluated the effect of soy-based and milk-based yogurts against enamel erosive-abrasive surface loss. MATERIALS AND METHODS: Ninety-eight bovine enamel specimens were randomly allocated to seven experimental groups (n = 14). Over seven days, specimens underwent six daily erosive cycles (0.05 M citric acid, pH 2.3, 2 min), interspersed with remineralizing solution (pH 6.5). Post-acid preventive measures consisted of immersion in milk-based yogurt (pH 4.4), soy-based yogurt (pH 4.7), or tap water for 3 min twice daily. Under erosion-abrasion conditions, specimens underwe

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42240712Открыть статью

Effects of printing orientation and postpolymerization time on the color stability, gloss, surface roughness, and Vickers hardness of an additively manufactured occlusal splint material.

OBJECTIVE: This in vitro study evaluated the effects of printing orientation and postpolymerization time on the color stability, gloss, surface roughness, and Vickers hardness of an occlusal splint material fabricated by additive manufacturing after artificial aging. METHODS: Disc-shaped specimens were fabricated from a photopolymer occlusal splint resin at 0-degree, 45-degree, and 90-degree printing orientations and subjected to 10- or 20 min postpolymerization. Separate specimen sets were used for optical, surface-roughness, and Vickers-hardness evaluations. Color stability and gloss specim

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42413710Открыть статью

Facile Synthesis of Monodisperse Gold Nanorods, Gold Nanobipyramids and Gold Nanocups with Different Coatings and Evaluation of Their Cellular Cytotoxicity.

INTRODUCTION: Assessing the cytotoxicity of gold nanoparticles (GNPs) has gained importance due to their development in the biomedical field. METHODS: In this study, we systematically synthesized gold nanorods (GNRs), gold nanobipyramids (GNBPs), and gold nanocups (GNCs) using a seed-mediated method, with an average length of 32.53 ± 4.67 nm, 72.90 ± 7.54 nm and 118.01 ± 11.02 nm, respectively. RESULTS: Furthermore, using the cell counting kit-8 (CCK-8) assay, we assessed the cellular cytotoxicity of three different types of GNPs with various different surface coatings, such as organic cetyl

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 39806973Открыть статью

Fluorescent Nanodiamond-Based Delivery Systems for Mitochondrial Targeting of Bioactive Peptides.

Mitochondria are recognized as key players affecting hallmarks of oncogenesis, tumor progression, and chemotherapy resistance, positioning this organelle as an important therapeutic target. We previously demonstrated that impairment of the AIF/CHCHD4-dependent protein import pathway disrupts mitochondrial bioenergetics and cell survival, highlighting this protein complex as a promising candidate for therapeutic intervention. Building on this concept, we identified a 27-residue peptide (N27) capable of perturbing the AIF-CHCHD4 interaction. However, its poor cellular uptake and inefficient mito

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42675618Открыть статью

Membrane-anchoring engineering mediated the self-assembly of multifunctional nanocarriers: An efficient platform for astaxanthin delivery.

To overcome the instability of astaxanthin (AST) during processing and gastrointestinal delivery, this study developed a multifunctional nanocarrier through the precise self-assembly of lipid bilayers that incorporated d-α-tocopherol polyethylene glycol 1000 succinate, a widely used biocompatible surfactant known as TPGS. Multidimensional characterization results demonstrated that the incorporation of TPGS formed a stable hydration layer, contributing to the distinctive mushroom-cloud-like architecture on the liposome surface. Spectroscopic analysis confirmed that the hydrophobic segment of TP

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41747347Открыть статью

Hydrogen Sulfide-Activated Background-Free Self-Referenced Surface-Enhanced Raman Scattering Nanoprobe for Real-Time and Precise Monitoring of Drug-Induced Liver Injury Progression.

Accurate quantification and real-time monitoring of hydrogen sulfide (H2S) dynamics are critical for the early diagnosis and therapeutic intervention of liver injury, but remain challenging. Herein, we first report an activatable, background-free, ratiometric surface-enhanced Raman scattering (SERS) nanoprobe (Au@MBN@Au@PB, AMAP) for quantitative and real-time monitoring of H2S during liver injury progression. The AMAP nanoprobe features a 4-mercaptobenzonitrile (MBN)-encoded gold core as an internal standard, combined with an H2S-responsive Prussian blue (PB) shell. Crucially, both Raman repo

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42441702Открыть статью