MedElevator Войти в исследования
Открытая медицинская библиотека

Результаты поиска

Медицинские публикации, первоисточники и полные тексты.
Для клинического вопроса, нового знания и следующего исследования.

Ищем по исходному запросу. Уточняем медицинские термины для поиска на других языках…

Результаты поиска

23 901 публикаций

Поиск: 153 мс
Публикации на разных языках · PubMed, Europe PMC и данные издателей через Crossref · 315 с найденным полным текстом
Выберите статьи для научной работыПосле входа — выбор статей и сборка документа

Activated biochars derived from green coconut pericarp and polyurethane waste for CO2 capture.

Porous carbon materials derived from waste resources have been widely investigated for gas separation applications due to their tunable surface chemistry and pore structure. In this work, biochars (BC) obtained from coconut pericarp and from co-pyrolysis with waste polyurethane were chemically activated using H3PO4 and KOH and evaluated as adsorbents for post-combustion CO2 capture. The materials were prepared by pyrolysis and characterized in terms of textural properties and surface functionality. CO2 adsorption performance was assessed through low-pressure isotherms at different temperatures…

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42361546Открыть статью

Preparing high-performance microspheres based on the chitosan-assisted dispersion of reduced graphene oxide in aqueous solution for bilirubin removal.

The removal of excess bilirubin from blood is of great clinical importance. Reduced graphene oxide (rGO) is often used to efficiently remove … mpatibility as a base material, and the entrapped rGO contributes to mechanical strength and a high adsorption capacity. The CS/rGO microspheres exhibited a high bilirubin adsorption capacity (215.56 mg/g), which is significantly higher than those of the rGO and CS microspheres. The determined mass-transfer factors revealed that the rich pores of the CS/rGO …

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 38615558Открыть статью

Boron-rich hybrid BCN nanoribbons for highly ambient uptake of H2S, HF, NH3, CO, CO2 toxic gases.

Nanomaterials-based gas sensors are widely applied for the monitoring and fast detection of hazardous gases owing to their sensitivity and selectivity. Hydrogen sulfide (H2S), hydrogen fluoride (HF), ammonia (NH3), and carbon monoxide/dioxide (CO/CO2) produced from petroleum fields, sewage, mines, and gasoline are harmful for both human life and environment. With an increase in the emission of these toxic compounds, their real-time monitoring and efficient adsorbent application and storage are very necessary. To this end, we investigated the adsorption characteristic and sensitivity factor of …

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 38264800Открыть статью

Tuning the Pore Environment of MOFs toward Efficient CH4/N2 Separation under Humid Conditions.

Adsorption separation technology using adsorbents is promising as an alternative to the energy-demanding cryogenic distillation of natural gas (CH4/N2) separation. Although a few adsorbents, such as metal-organic frameworks (MOFs), with high performance for CH4/N2 separation, have been reported, it is still challenging to target the desired adsorbents for the actual CH4/N2 separation under humid conditions because the adsorption capacity and selectivity of the adsorbents might be mainly dampened by water vapor. Except for the high CH4 uptake and CH4/N2 selectivity, the adsorption material shou…

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 35319192Открыть статью

Enhanced removal of sulfonamide antibiotics from water by phosphogypsum modified biochar composite.

Antibiotic pollution has become a global eco-environmental issue. To reduce sulfonamide antibiotics in water and improve resource utilization of solid wastes, phosphogypsum modified biochar composite (PMBC) was prepared via facile one-step from distillers grains, wood chips, and phosphogypsum. The physicochemical properties of PMBC were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), Zeta potential, X-ray diffraction (XRD), etc. The influencing factors, adsorption behaviors, and mechanisms of sulfadiazine (SD) and sulfamethazine (SMT) onto P…

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 37032034Открыть статью

Phosphate Removal Mechanisms in Aqueous Solutions by Three Different Fe-Modified Biochars.

Iron-modified biochar can be used as an environmentally friendly adsorbent to remove the phosphate in wastewater because of its low cost. In this study, Fe-containing materials, such as zero-valent iron (ZVI), goethite, and magnetite, were successfully loaded on biochar. The phosphate adsorption mechanisms of the three Fe-modified biochars were studied and compared. Different characterization methods, including scanning electron microscopy/energy-dispersive spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), were used to study the…

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 36612648Открыть статью

Tailored-designed material for the preconcentration of Cd(II) on glycidyl methacrylate-based ion-imprinted polymer for flame atomic absorption for trace determination in real samples: multivariate optimization.

A new Cd(II)-imprinting polymer was synthesised based on glycidyl methacrylate (Fe3O4@GMA@IIP) and employed to develop a dispersive magnetic solid-phase extraction method for the preconcentration prior to the determination of Cd(II) from the environmental samples. A central composite design (CCD) based on response surface methodology was used for optimization of the process variables and the material shows the promising saturation adsorption capacity of 28.21 mg g-1 under the optimum pH of 4.9 within 15.2 min at saturation concentration 914 μg mL-1. The experimental data were well described by…

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 35554830Открыть статью

Modifications of ultraviolet irradiation and chlorination on microplastics: Effect of sterilization pattern.

Chlorination and ultraviolet disinfection in drinking water treatment plants (DWTPs) may be highly destructive for microplastics (MPs). Inve … d and oxidized modifications on the MPs surface, resulting in distinct effects on their sinking and adsorption performance. After combining sterilization (180 mJ cm-2 UV-C irradiation +9675 mg min L-1 chlorination), the adsorption capacities of ciprofloxacin by PET and PVC were slightly improved, and the one by PS was inhibited. Yet, PET, PVC and PS tend to …

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 34954159Открыть статью

Unexpected Favorable Role of Ca2+ in Phosphate Removal by Using Nanosized Ferric Oxides Confined in Porous Polystyrene Beads.

Polystyrene-based nanoferric oxide composite is a representative nanomaterial successfully applied in scale-up water decontamination for arsenic and phosphorus. However, little is available on the effect of solution chemistry (for instance, the coexisting Ca2+) on the long-term performance of the nanocomposite. In this study, we carried out 20 cyclic runs of phosphate adsorption-desorption on a polymer-supported ferric nanocomposite HFO@201. Unexpectedly, an enhanced phosphate removal was observed in the presence of Ca2+, which is quite different from its adverse effect on phosphate capture by…

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 30481471Открыть статью

Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas.

The surface area of zinc sulfide (ZnS) was successfully enlarged using nanostructure particles synthesized by a liquid-phase precipitation method. The ZnS with the highest surface area (named Nano-ZnS) of 196.1 m(2)·g(-1) was then used to remove gas-phase elemental mercury (Hg(0)) from simulated coal combustion fuel gas at relatively high temperatures (140 to 260 °C). The Nano-ZnS exhibited far greater Hg(0) adsorption capacity than the conventional bulk ZnS sorbent due to the abundance of surface sulfur sites, which have a high binding affinity for Hg(0). Hg(0) was first physically adsorbed o…

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 27508312Открыть статью

Simultaneous removal of As(V) and Cr(VI) from water by macroporous anion exchanger supported nanoscale hydrous ferric oxide composite.

As(V) and Cr(VI) are both highly toxic anionic pollutants and commonly co-exist in some industrial effluents and contaminated waters. In this study, simultaneous removal of them was efficiently achieved by employing a composite adsorbent (HFO-201) fabricated by immobilizing nanoscale hydrous ferric oxide (HFO) within a macroporous anion exchanger D201. The HFO-201 composite possesses two types of adsorption sites, i.e. the quaternary ammonium groups fixed on the D201 matrix and the embedded HFO nanoparticles. In the binary solution, the adsorption kinetic processes of both As(V) and Cr(VI) by …

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 28012384Открыть статью

Confined Flocculation of Ionic Pollutants by Poly(L-dopa)-Based Polyelectrolyte Complexes in Hydrogel Beads for Three-Dimensional, Quantitative, Efficient Water Decontamination.

The development of simple and recyclable adsorbents with high adsorption capacity is a technical imperative for water treatment. In this work, we have successfully developed new adsorbents for the removal of ionic pollutants from water via encapsulation of polyelectrolyte complexes (PECs) made from positively charged poly(allylamine hydrochloride) (PAH) and negatively charged poly(l-3,4-dihydroxyphenylalanine) (PDopa), obtained via the self-polymerization of l-3,4-dihydroxyphenylalanine (l-Dopa). Given the outstanding mass transport through the hydrogel host matrixes, the PDopa-PAH PEC guests …

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 25981870Открыть статью

Preparation of cross-linked magnetic chitosan with quaternary ammonium and its application for Cr(VI) and P(V) removal.

Pollutants that exist in anionic species are issues of concern in water treatment. Compared to cationic pollutants, the removal of anionic pollutants by adsorption is more difficult because most adsorbents carry predominantly negative charges in neutral and alkaline environments. In this study, a cross-linked chitosan derivative with quaternary ammonium and magnetic properties (QM-chitosan) was prepared and employed to remove chromium (VI) and phosphorus (V) (Cr(VI) and P(V)) from aqueous environments. The QM-chitosan was characterized by Fourier transform infrared spectrometry (FT-IR), thermo…

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 25499485Открыть статью

Use of bone char as an adsorbent in preparation of water for dialysis.

Currently, deionizers (DI) and reverse osmosis (RO) are used to prepare water for dialysis. When water metal levels increase, for example, with the use of alum, the variation in metal content can reduce RO performance. Pretreatment of water with ethylenediaminetetraacetic acid or alkali can be used to reduce Al fouling. The authors examined adsorption of metal water contaminants with bone char (BRIMAC, Biolab, Oakville, Canada) as a cheaper alternative. Water treatment for the unit consists of a blend valve, 30 mu filter, 2 X 3 cu ft adsorption tanks, 5 mu filter, 30,000 grain automatic water …

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 1457876Открыть статью

One Stone for Three Birds: Synergistic Preparation of Nitrogen-Enriched Biochar, High-Quality Bio-Oil, and Syngas via Pyrolysis of Waste Chinese Medicine Residues.

This study addresses the resource waste and environmental pollution resulting from the conventional disposal of waste Chinese medicine residues (WCMRs) and examines the feasibility of high-value resource recovery using pyrolysis technology. Products obtained through oxygen-constrained pyrolysis of underground (UM) and above-ground (GM) biomass were compared systematically, and a catalyst, CaO, was added to enhance the production of syngas. Several characterization methods and batch adsorption experiments were used to comprehensively assess the performance and composition of the three-phase pro…

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42852216Открыть статью

Structure-Performance Relationships of Metal Oxide Nanofluids for Enhanced Oil Recovery: Balancing Colloidal Stability, Interfacial Regulation, and Pore Transport.

The effect of nanofluid assistance in improving the recovery rate depends on the balance between colloidal stability, interfacial regulation, and the transport capacity of nanoparticles in porous media. Under the same preparation and experimental conditions, this study systematically compared four nanofluids of SiO2, TiO2, Al2O3, and Fe3O4 to establish their structure-performance relationship. Through a variety of complementary characterization methods and core flooding experiments, the colloidal properties, rheological behavior, interfacial characteristics, adsorption characteristics, transpo…

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42882698Открыть статью

SF6 Decomposition Gas Sensing on an AlN/Janus MoSeTe Heterostructure: A Density Functional Theory Study.

The detection of SF6 decomposition gases is crucial for condition monitoring and fault diagnosis of gas-insulated electrical equipment. In this work, a van der Waals heterostructure composed of an AlN monolayer and Janus MoSeTe (AlN@MoSeTe) is proposed as a sensing platform for representative SF6 decomposition gases, including SO2, H2S, SOF2, SO2F2, and SF4. Density functional theory calculations were performed to systematically investigate adsorption characteristics, electronic structure modulation, and sensing-related properties of the heterostructure. The results reveal that AlN@MoSeTe exhi…

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41949817Открыть статью

Sustainable N, P co-doped hierarchical porous carbon via coupling phytic acid-melamine assisted hydrothermal carbonization with high temperature activation.

Developing sustainable carbon materials with both dye adsorption and electrochemical properties offers a promising strategy for carbon neutrality. Herein, a coupled carbonization strategy was employed to prepare porous carbon with high-level heteroatom doping and hierarchical pores, involving the co-hydrothermal treatment of wood flour with phytic acid and melamine, followed by K2CO3 activation. Phytic acid and melamine act as P/N sources and structural builders, promoting hydrochar formation via phosphate coordination and condensation reactions, resulting in a stable cross-linked network rich…

СтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41638149Открыть статью

Size-dependent activation of ammonia borane on copper clusters (Cu x , x = 2-10): a DFT study of bonding, electronic structure, and hydrogen evolution.

Ammonia borane (NH3BH3, AB) is a promising hydrogen-storage material; however, its practical implementation requires efficient and low-cost catalysts for hydrogen release. In this study, density functional theory calculations were performed to investigate the size-dependent activation of AB on copper clusters (Cu x , x = 2-10) in both gas and aqueous phases. Adsorption of AB on the copper clusters induces elongation of the N-H and B-H bonds by up to 0.027 Å, accompanied by contraction of the B-N bond, indicating activation toward dehydrogenation. The calculated binding energies range from -0.8…

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 42427391Открыть статью

A natural-biopolymer sodium alginate magnetic multifunctional adsorbent with high capacity for broad-spectrum fluoroquinolone antibiotic removal from water.

Persistent fluoroquinolone (FQ) antibiotics in water bodies boost bacterial resistance and endanger aquatic ecosystems, necessitating efficient removal. In this work, a natural-biopolymer sodium alginate-based adsorbent (SA@Fe3O4-SPABS) was prepared via cross-linking and amidation to introduce multiple functional groups onto the adsorbent framework. Gatifloxacin (GAT) was selected as a representative fluoroquinolone to evaluate the adsorption performance. The kinetic data were well described by the pseudo-first-order model. Based on the Langmuir model, SA@Fe3O4-SPABS exhibited an adsorption ca…

СтатьяПолный текст не найденПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 41763057Открыть статью