MedElevator Войти в исследования
Открытая медицинская библиотека

Результаты поиска

Медицинские публикации, первоисточники и полные тексты.
Для клинического вопроса, нового знания и следующего исследования.

Ищем по исходному запросу. Уточняем медицинские термины для поиска на других языках…

Результаты поиска

39 327 публикаций

Поиск: 66 мс
Публикации на разных языках · PubMed, Europe PMC и данные издателей через Crossref · 3 478 с найденным полным текстом
Выберите статьи для научной работыПосле входа — выбор статей и сборка документа

Influence of cross-rolling on the micro-texture and biodegradation of pure iron as biodegradable material for medical implants.

Iron-based biodegradable metals have been shown to present high potential in cardiac, vascular, orthopaedic and dental in adults, as well as paediatric, applications. These require suitable mechanical properties, adequate biocompatibility while guaranteeing a low toxicity of degradation products. For example, in cardiac applications, stents need to be made by homogeneous and isotropic materials in order to prevent sudden failures which would impair the deployment site. Besides, the presence of precipitates and pores, chemical inhomogeneity or other anisotropic microstructural defects may trigg

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 25644452Открыть статью

In vitro degradation behavior and cytocompatibility of biodegradable AZ31 alloy with PEO/HT composite coating.

Biodegradable magnesium-based implants have attracted much attention recently in orthopedic applications because of their good mechanical properties and biocompatibility. However, their rapid degradation in vivo will not only reduce their mechanical strength, but also induce some side effects, such as local alkalization and gas cavity, which may lead to a failure of the implant. In this work, a hydroxyapatite (HA) layer was prepared on plasma electrolytic oxidization (PEO) coating by hydrothermal treatment (HT) to fabricate a PEO/HT composite coating on biodegradable AZ31 alloy. The in vitro d

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 25731092Открыть статью

A novel multilayer model with controllable mechanical properties for magnesium-based bone plates.

Proper mechanical properties are essential for the clinical application of magnesium-based implants. In the present work, a novel multilayer model composed of three layers with desirable features was developed. The modulus of the multilayer model can be adjusted by changing the thickness of each layer. To combine three layers and improve the corrosion resistance of the whole multilayer model, the polycaprolactone coating was employed. In the immersion test, pH values, the concentration of released magnesium ions, and weight loss indicate that the corrosion rate of multilayer models is consider

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 25791460Открыть статью

Polythiophene-g-poly(ethylene glycol) with Lateral Amino Groups as a Novel Matrix for Biosensor Construction.

In the ever-expanding field of conducting polymer research, functionalized graft hybrid copolymers have gained considerable interest in the biomedical engineering and biosensing applications, particularly. In the present work, a new biosensor based on conducting graft copolymer for the detection of phenolic compounds was developed. Thereby, a robust and novel material, namely "polythiophene-g-poly(ethylene glycol) with lateral amino groups" (PT-NH2-g-PEG) hybrid conducting polymer was synthesized via Suzuki condensation polymerization and characterized with (1)H NMR analysis, UV-vis spectrosco

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 26323569Открыть статью

Interfacial and biological properties of the gradient coating on polyamide substrate for bone substitute.

Fabrication of bioactive and mechanical matched bone substitutes is crucial for clinical application in bone defects repair. In this study, nano-hydroxyapatite/polyamide (nHA/PA) composite was coated on injection-moulded PA by a chemical corrosion and phase-inversion technique. The shear strength, gradient composition and pore structure of the bioactive coating were characterized. Osteoblast-like MG63 cells were cultured on pure PA and composite-coated PA samples. The cells' adhesion, spread and proliferation were determined using MTT assay and microscopy. The results confirm that the samples

Оценочное исследованиеСтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 25121648Открыть статью

Development of biocompatible and proton-resistant quantum dots assembled on gelatin nanospheres.

In this study, biocompatible and proton-resistant CdSe quantum dots (QDs) assembled on gelatin nanospheres (GNs) have been synthesized by combining the two-step desolvation method with the layer-by-layer assembly technique. The core-shell fluorescent gelatin nanosphere consists of a gelatin core and a four-layer shell of hydrophilic CdSe QDs assembled through polyelectrolytes (PE). The morphology, microstructures, and photostability of the hybrid spheres were further investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), fluorospectrometery, and confocal fl

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 24506768Открыть статью

Design of heat shock-resistant surfaces to prevent protein aggregation: Enhanced chaperone activity of immobilized α-Crystallin.

α-Crystallin is a multimeric protein belonging to the family of small heat shock proteins, which function as molecular chaperones by resisting heat and oxidative stress induced aggregation of other proteins. We immobilized α-Crystallin on a self-assembled monolayer on glass surface and studied its activity in terms of the prevention of aggregation of aldolase. We discovered that playing with grafted protein density led to interesting variations in the chaperone activity of immobilized α-Crystallin. This result is in accordance with the hypothesis that dynamicity of subunits plays a vital role

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 24689782Открыть статью

Effects of polyvinylpyrrolidone both as a binder and pore-former on the release of sparingly water-soluble topiramate from ethylcellulose coated pellets.

Delivering sparingly water-soluble drugs from ethylcellulose (EC) coated pellets with a controlled-release pattern remains challenging. In the present study, hydrophilic polyvinylpyrrolidone (PVP) was used both as a binder and a pore-former in EC coated pellets to deliver sparingly water-soluble topiramate, and the key factors that influenced drug release were identified. When the binder PVP content in drug layers below 20% w/w was decreased, the physical state of topiramate changed from amorphous to crystalline, making much difference to drug solubility and dissolution rates while modifying t

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 24530810Открыть статью

Preparation of methotrexate-loaded, large, highly-porous PLLA microspheres by a high-voltage electrostatic antisolvent process.

A high-voltage (10 kV) electrostatic antisolvent process was used to prepare methotrexate (MTX)-loaded, large, highly-porous poly-L-lactide (PLLA) microspheres. MTX solution in dimethyl sulfoxide (DMSO) and PLLA solution in dichloromethane (DCM) were homogeneously mixed, and then ammonium bicarbonate (AB) aqueous solution was added. The mixed solution was emulsified by ultrasonication with Pluronic F127 (PF127) as an emulsion stabilizer. The emulsion was electrosprayed by the specific high-voltage apparatus and dropped into a 100 mL of ethanol, which acted as an antisolvent for the solute and

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 23661255Открыть статью

Quantum dots induce heat shock-related cytotoxicity at intracellular environment.

Quantum dots (QDs) are semiconductor nanocrystals with unique optical properties. Different proteins or polymers are commonly bound to their surfaces to improve biocompatibility. However, such surface modifications may not provide sufficient protection from cytotoxicity due to photodegradation and oxidative degradation. In this study, the cytotoxic effects of QDs, CdTe, and CdSe/ZnS were investigated using cadmium-resistant cells. CdTe QDs significantly reduced cell viability, whereas, CdSe/ZnS treatment did not markedly decrease the cell number. CdTe QDs were cytotoxic in cadmium-resistant ce

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 24092018Открыть статью

Effect of CdSe nanoparticle addition on nanostructuring of PS-b-P4VP copolymer via solvent vapor exposure.

The surface morphology of poly(styrene-b-4 vinyl pyridine) (PS-b-P4VP) diblock copolymer thin films after solvent vapor annealing has been studied. Morphological features can be switched upon exposure to vapors of a solvent selective for one of the blocks. Self-assembled nanostructures such as hexagonal or striped morphologies were obtained varying vapor exposure time. In addition, the effect of the presence of CdSe nanoparticles located in the P4VP block on obtained nanostructures was analyzed. Atomic force microscopy (AFM) was used for morphological characterization of the block copolymer an

СтатьяПоддержка исследования: вне правительства СШАПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 24370397Открыть статью

Rehabilitation of the edentulous posterior maxilla after sinus floor elevation using deproteinized bovine bone: a 9-year clinical study.

OBJECTIVES: To evaluate the long-term survival rate of rough-surfaced implants placed in maxillary sinuses augmented with deproteinized bovine bone (Bio-Oss; Geistlich Pharma AG, Wolhusen, Switzerland). MATERIALS AND METHODS: Thirteen maxillary sinuses were augmented in 10 patients with Bio-Oss. After an average healing period of 13.8 months, 24 implants were placed. In 4 cases, biopsies were performed and submitted to histological analysis. Clinical and radiographic evaluation was performed 9 years after implant placement and minimum 8 years after functional loading. RESULTS: At the 9-year

Клиническое исследованиеСтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 22968571Открыть статью

Corn trypsin inhibitor coating attenuates the prothrombotic properties of catheters in vitro and in vivo.

Catheters initiate coagulation by activating factor (f) XII, which can lead to catheter thrombosis. Fondaparinux, which only targets activated fX (fXa), is associated with more catheter thrombosis than heparin, which targets fXa and thrombin. To render catheters less thrombogenic and fondaparinux more effective, we examined whether coating catheters with corn trypsin inhibitor (CTI), which blocks fXIIa, attenuates catheter-induced clotting and promotes fondaparinux activity. Compared with unmodified catheters, CTI-coated catheters demonstrated (a) decreased adsorption of fibrinogen and fXII, (

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 22824529Открыть статью

Significance of the amide functionality on DOPA-based monolayers on gold.

The adhesive proteins secreted by marine mussels contain an unusual amino acid, 3,4-dihydroxyphenylalanine (DOPA), that is responsible for the cohesive and adhesive strength of this natural glue and gives mussels the ability to attach themselves to rocks, metals, and plastics. Here we report a detailed structural and spectroscopic investigation of the interface between N-stearoyldopamine and a single-crystalline Au(111) model surface and an amide-absent molecule, 4-stearylcatechol, also on Au(111), with the aim of understanding the role of the amide functionality in the packing, orientation, a

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 23157706Открыть статью

Tensile bond strength of silicone-based soft denture liner to two chemically different denture base resins after various surface treatments.

This study evaluated the effect of various surface treatments on the tensile bond strength of a silicone-based soft denture liner to two chemically different denture base resins, heat-cured polymethyl methacrylate (PMMA), and light-activated urethane dimethacrylate or Eclipse denture base resin. PMMA test specimens were fabricated and relined with a silicone-based soft denture liner (group AC). Eclipse test specimens were prepared according to the manufacturer's recommendation. Before they were relined with a silicone-based soft denture liner, each received one of three surface treatments: unt

СтатьяПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 22447403Открыть статью

A simple and general route for monofunctionalization of fluorescent and magnetic nanoparticles using peptides.

Nanoparticles are now utilized in many diverse biological and medical applications. Despite this, it remains challenging to tailor their surface for specific molecular targeting while maintaining high biocompatibility. To address this problem, we evaluate a phytochelatin-related peptide surface coating to produce functional and biocompatible nanoparticles (NPs) based on fluorescent InP/ZnS and CdSe/ZnS or superparamagnetic FePt and Fe(3)O(4). Using a combination of transmission electron microscopy, size-exclusion chromatography and gel electrophoresis (GE), we demonstrate the excellent colloid

СтатьяПоддержка исследования: вне правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 21411925Открыть статью

Effect of tetracycline on the bond performance of etch-and-rinse adhesives to dentin.

This study evaluated the effect of modified tetracycline on the resin-dentin bond strength (µTBS), silver nitrate uptake (SNU) and solution homogeneity (SH) of two adhesives. Dentin surfaces were treated with phosphoric acid, rinsed off and either rewetted with water (control group - CO), 2% minocycline (MI), 2% doxycyline (DO) or 2% chlorhexidine (CH). Adhesive systems (Adper Single Bond 2 and Prime Bond NT) and composite were applied and light-polymerized. Specimens were sectioned to obtain bonded sticks (0.8 mm²) to test under tension at 0.5 mm/min. For SNU, specimens were immersed in silve

СтатьяПолный текст не найденПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 22031061Открыть статью

Finite element modeling of reverberation and transmission loss in shallow water waveguides with rough boundaries.

A finite element model for the reverberation and propagation in a shallow water waveguide with a sandy bottom was calculated for five different environments at a center frequency of 250 Hz. The various environments included a rough water/sediment interface, a rough air/water interface, roughness at both interfaces and downward and upward refracting sound speed profiles with roughness at both interfaces. When compared to other models of reverberation such as ray theory, coupled modes, and parabolic equations, finite elements predicted higher levels of reverberation. At early times, this is due

СтатьяПоддержка исследования: вне правительства СШАПоддержка правительства СШАПоиск полного текста в очередиПеревод в очереди
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 21428490Открыть статью

Influence of experimental palatal plate on mandibular position during continuous [n] phonation and at the physiologic rest position.

The purpose of this study was to clarify the influence of an experimental palatal plate on the mandibular position during continuous [n] phonation and at the physiologic rest position. Twenty healthy dentulous volunteers (10 males and 10 females, mean age of 24.4 years) were investigated. Three kinds of experimental plate with a thickness of 3 mm, 5 mm, and 8 mm were fabricated and used for each subject. The mandibular position was recorded by a K7 kinesiograph during continuous [n] phonation and at the physiologic rest position under normal conditions and when the three kinds of plate with di

Сравнительное исследованиеСтатьяПоиск полного текста в очередиПеревод пока не подготовлен
Обработка статьи · этапы, ошибки и управление
Загрузка состояния…

История · было → стало

Состояние обновляется каждые 5 секунд, пока блок открыт. Процент показывается только там, где известен объём работы. Пауза останавливает продолжение этапа; текущий запрос к источнику может завершиться.

PMID 20652792Открыть статью