Biplane Chevron Osteotomy in Hallux Valgus: Biomechanical Effects of Lateral and Plantar Displacement Under Simulated Standing Load.

BACKGROUND

Plantar displacement during chevron osteotomy may improve load distribution in hallux valgus, but biomechanical evidence is limited. This study evaluates how lateral and plantar displacement affect contact properties in the first metatarsophalangeal (MTP-1) and the first tarsometatarsal (TMT-1) joints under standing load.

METHODS

Twelve cadaveric feet with hallux valgus and 4 normal specimens were tested under simulated standing load. Biplane osteotomy was performed with lateral displacement (2, 4, 6 mm) and plantar displacement (0, 2, 4 mm). Joint contact metrics were measured using Tekscan sensors.

RESULTS

Lateral displacement significantly affected contact force and peak pressure at both joints (P < .01). Interaction effects between lateral and plantar displacement were also significant (P < .01). A combination of 4-mm lateral and 2-4-mm plantar displacement most closely approximated contact pressures seen in the normal group.

CONCLUSION

Lateral displacement of 4 mm with 2-4 mm plantar shift optimizes contact pressure restoration in cadaveric hallux valgus feet. These findings offer biomechanical guidance but require clinical validation.

CLINICAL RELEVANCE: Understanding how lateral and plantar displacement affect joint biomechanics provides a foundational framework for refining surgical planning in biplane chevron osteotomy. By identifying displacement combinations that approximate normal joint pressures, this study offers biomechanical guidance to help reduce postoperative complications such as transfer metatarsalgia. However, clinical studies are needed to determine whether these biomechanical findings translate into improved outcomes in patients with hallux valgus.